News

News

Christmas wishes by Laura

by Laura Nistal on Oct 31 2023

Hello everyone! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this Christmas card that I hope will inspire you! To start I used the "Stocking Full of Coal Stamps” which I stamped with the “Black Hybrid ink pad” and then painted with alcohol markers. Then to give the stamps more relief, I used the white Gelly Roll in the areas where I wanted to give shine and the black Micron Pigma in the areas where I wanted to give more depth. For the background I used the “Christmas Whishes Stamps” which I stamped with black ink and also added a strip cut from red cardboard of the "Slimline Scene Building Time for Tea Dies”And for the sentiment I used a phrase from the “Stocking Full of Coal Stamps” that i stamped with the “Black Hybrid ink pad”.I also added some “Gems mix fire” as decoration. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. A huge kiss and until next time!

News

Another Rainbow for all Seasons by Laura

by Laura Nistal on Jul 11 2023

Hello everyone! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this card that I hope will inspire you! To start I used the "Tweet Tweet Friends Stamps” which I stamped with the “Black Hybrid ink pad” and then painted with alcohol markers. Then to give the stamps more relief, I used the white Gelly Roll in the areas where I wanted to give shine and the black Micron Pigma in the areas where I wanted to give more depth. Below I used the “Tweet Tweet Friends Coordinating dies” to cut them out, but you can also carefully cut them out with scissors. Next I prepared the rainbow with the “Another Rainbow for All Seasons Die” that I cut in different colors. I also cut the clouds out of the "Slimline Curvy Rainbow Die” to support the rainbow. For the background I used the “Slimline Cloud Coverage Stencil” to simulate a sky and I painted it with distress inks. And for the sentiment I used a phrase from the “Tweet Tweet Friebds Stamps” that i stamped with the “Black Hybrid ink pad”. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. A huge kiss and until next time!

News

Fanciful Feather by Laura

by Laura Nistal on Apr 05 2023

Hello everyone! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this card that I hope will inspire you! To start I used the "Fanciful Feather die" that I cut out of gold cardstock. Then I cut a white cardboard for one of the feathers and painted it with distress oxide inks in blue and green tones. For the background I also used the same tones, first I painted the cardboard and then I used darker colors with the "Tree bark 6x6" stencil. I did it diagonally to give the card some movement. Finally I placed a gold strip to separate the two sides of the card. For the sentiment I used the word "Celebrate" that comes on the "A2 Full Front Shaker" die set. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. A huge kiss and until next time! Laura

News

Happy birthday by Laura

by Laura Nistal on Mar 15 2023

Hello everyone! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this card that I hope will inspire you! To begin I cut several cardboard in a rectangular shape, with which I am going to create the gifts. I used different cardboard in pink, fuchsia and craft color to later combine them. I also cut some thin strips to make the gift ribbon. I then used the "A Bow for any reason die" to cut the bows on all the packages. I also used the "A2 Pierced Blanket Cover Plate Die", the "Slimline Trapezoid Spiral Stencil" and the "A Whole Lot Of Polka Dots Stencil" to give texture to some gifts. Then I combined the different colors to make them contrast. For the sentiment I used the word "Happy birthday" that I cut out of pink cardstock. This word comes with the "A2 Full Front Shaker Die". To decorate I added some "Gems mixes fire" to give the card a little more contrast. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. A huge kiss and until next time! Laura

News

Birthday card by Laura

by Laura Nistal on Feb 22 2023

Hello everyone! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this card that I hope will inspire you! To start I used the "Peter bunny and Friends" Stamps set that I stamped with "Black Hybrid ink pad" which is perfect for this type of stamps! Then I painted all the images with alcohol markers and then with a white marker I glossed it to make it stand out. Then i cut out the images using the "Peter bunny and Friends" coordinating dies but you can carefully cut them out with scissors if you prefer. Next I prepared the background: for this I used the "Plumeria Flowers 6x8" stencil that I painted with distress inks in a corner of the card. For the sentiment I used a phrase from the same set of stamps that I cut out of white cardstock. To decorate I added some "Gems mixes fire" to give the card a little more contrast. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. A huge kiss and until next time! Laura

News

Sea card by Laura

by Laura Nistal on Feb 01 2023

Hello everyone! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this card that I hope will inspire you! To start I used the "Even more of a fishy lot" Stamps set that I stamped with "Black Hybrid ink pad" which is perfect for this type of stamps! Then I painted all the images with alcohol markers and then with a white marker I glossed it to make it stand out. Then i cut out the images using the "Even more of a fishy lot" coordinating dies but you can carefully cut them out with scissors if you prefer. I also used the "You were mermaid for me" stamp to make the seabed, which I also painted with alcohol markers. Next I prepared the background: for this I used a sky blue cardboard to which I applied the "Sun with rays" 6x6 stencils with blue distress oxide inks. For the sentiment I used a phrase from the same set of stamps that I cut out of white cardstock. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. A huge kiss and until next time! Laura

News

Christmas Countdown: Christmas wishes by Laura

by Laura Nistal on Dec 22 2022

Hello and welcome to the Christmas countdown on PFS blog! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this christmas card that I hope will inspire you! To start I used the "Animal Crackers Christmas Wishes" Stamps set that I stamped with "Black Hybrid ink pad" which is perfect for this type of stamps! Then I painted all the images with alcohol markers and then with a white marker I glossed it to make it stand out. Then i cut out the images using the "Animal Crackers Christmas Wishes" coordinating dies but you can carefully cut them out with scissors if you prefer. Next I prepared the background: for this I used the stamp "My World Revolves Around You" that I also stamped with "Black Hybrid ink pad" and then painted with alcohol markers. Then I used the "A2 She Said Yes Cover Plate" die to make the frame and painted it with distress oxide inks. For the sentiment I used the "Joy Word Die" that I cut out of metallic red cardstock. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. Don´t forget to come tomorrow for more Christmas inspiration! A huge kiss and until next time! Laura

News

Christmas Countdown: Magical Christmas by Laura

by Laura Nistal on Dec 16 2022

Hello and welcome to the Christmas countdown on PFS blog! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this christmas card that I hope will inspire you! To start I used the "Frolicking Winter Friends" Stamps set that I stamped with "Black Hybrid ink pad" which is perfect for this type of stamps! Then I painted all the images with alcohol markers and then with a white marker I glossed it to make it stand out. Then i cut out the images using the "Frolicking Winter Friends" coordinating dies but you can carefully cut them out with scissors if you prefer. On the other hand, I used the "Jolly Good Rainbow" die and painted each of its parts with Christmas colors. Next I prepared the background: for this I used a white cardboard to which I applied the "Paper Glaze Luxe Artic Fox" along with the "Petals 6x6" stencil. I then glued it onto a black cardstock to create a frame. For the sentiment I used the phrase "Christmas season is magical" on a white cardboard and using black ink. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. Don´t forget to come tomorrow for more Christmas inspiration! A huge kiss and until next time! Laura

News

Christmas Countdown - Jolly Christmas Gnome Scene

by Brenda Noelke on Dec 07 2022

Hello, Picket Fence friends!! Welcome back to the Countdown to Christmas!! Brenda here with a festive, frosty scene card to share with you today featuring the Jolly Christmas Gnome Stamp Set. I began by stamping the amazing Jolly Christmas Gnome Stamp Set onto white cardstock with PFS Black Hybrid Ink. I colored him with Copic markers, then used the Coordinating Die to cut him out. For the background, I die-cut the Slimline Rectangle Tree Cover Plate Die from dark brown cardstock. I trimmed a panel of white cardstock for the snow, added some shading with Copics, then adhered it to an A2 panel of light blue cardstock. The tree was adhered to the background and the excess was trimmed from the edges. I added some Winter Snowfall Paper Glaze Velvet with a paintbrush and sprinkled on some clear glitter while it was still wet. I splattered some diluted white gouache onto the background for the snowfall in my winter scene. The sentiment is also from the Jolly Christmas Gnome Stamp Set. It was white heat embossed onto black cardstock, then cut out with the Coordinating Die. The gnome and sentiment were both popped up with foam adhesive. I added some snow to the gnome with a white gel pen and my scene was finished!! This Jolly Christmas Gnome has sooooo much character!! I just LOVE him!! Thanks so much for dropping in today!! Have a wonderful Wednesday and be sure to check back each day for more inspiration during the Christmas Countdown!!

News

Joyeux Noel Nutcracker

by Michelle Bala on Nov 07 2022

Hello there! Michelle here, sharing a non traditional take on a Nutcracker. while scrolling through Google images, I came across some pastel water colored images I wanted to recreate. This A2 Tall Nutcracker Die, is my FAVORITE new product!!! I used pink, gold, white and black cardstock to dress up the nutcracker. I backed him on vellum cardstock. I dressed up his hat with a holly sprig from Santa's Hot Cocoa Mug Die and used the snowflake die for the background. I inked up the background with distress oxide inks in shades broken china and stormy sky. I added some splashes of water and than some paint splatters. I scattered some Vintage Bulbs Sequin Mix to the background. The sentiment is from the stamp set, Swanky Christmas Sentiments and the coordinating Die. Thanks for stopping by for a peek! Hope you have a great week! Michelle

News

Winter card by Laura

by Laura Nistal on Oct 19 2022

Hello everyone!! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this winter card that I hope will inspire you! To start I used the "Frolicking Winter Friends" Stamps set that I stamped with "Black Hybrid ink pad" which is perfect for this type of stamps! Then I painted all the images with alcohol markers and then with a white marker I glossed it to make it stand out. Then i cut out the images using the "Frolicking Winter Friends" coordinating dies but you can carefully cut them out with scissors if you prefer. Next I prepared the background: for this I used a white cardboard where I stamped with black ink the stamp "Scene Building Winter Scenery". Then I cut it out and glued a black cardboard to it to make a frame. For the sentiment I used the "Happy Day Word Topper Die" which I cut out of red and black cardstock and overlapped. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. A huge kiss and until next time! Laura

News

Santa Scene Card

by Brenda Noelke on Oct 13 2022

Hello, Picket Fence friends!! I hope this finds you all well!! I love sending funny Christmas cards to friends who have a good sense of humor!! When I saw the Name Off the Good List Stamp Set, I knew immediately who I would send it to!! I LOVE when that happens!! Let’s get to my card!! I began by stamping the Santa and sentiment from Name Off the Good List onto white cardstock with black hybrid ink. I colored Santa with Copic markers, then cut it and the sentiment out with the Coordinating Dies. For the background, I die-cut the A2 Evergreens On a Hill Cover Plate Die from heavyweight white cardstock. I mixed Winter Snowfall Paper Glaze with a bit of Sparkle Paper Glitz and spread it onto the bottom of the panel with a palette knife. I added some Leaf Green Paper Glaze to the trees with my finger, to create some texture. Once that was dry, I adhered it to an A2 size panel of dark blue cardstock, then a white card base. I diluted some Winter Snowfall Paper Glaze and splattered it onto the background with a paint brush. That dried pretty quickly, then I adhered Santa and the sentiment with foam tape. The snowflakes are from the Letters to Santa Mix and were the perfect finishing touch for my scene!! I love how this turned out!! How about you…do you like humorous or traditional cards for Christmas? I like to tailor them to the recipient and, like I said, I have the perfect person in mind for this one! Thank you so much for spending a bit of your day with me!! Tomorrow is the 14th and you know what that means…it’s RELEASE DAY!! YAY!! Have a great Thursday!! Brenda

News

Christmas card by Laura

by Laura Nistal on Sep 28 2022

Hello everyone!! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this Christmas card that I hope will inspire you! To start I used the "Animal Crackers Christmas Wishes" Stamps set that I stamped with "Black Hybrid ink pad" which is perfect for this type of stamps! Then I painted all the images with alcohol markers and then with a white marker I glossed it to make it stand out. Then i cut out the images using the "Animal Crackers Christmas Wishes" coordinating dies but you can carefully cut them out with scissors if you prefer. Next I prepared the background: for this I used a white cardboard that I painted with distress oxide inks and a green cardboard with which I used the "A2 Evergreen on a Hill Cover Plate Die" to which I then added the snow with the "Paper Glaze Luxe - Arctic Fox". For the sentiment I used the word "Greeting" that comes with the "A2 Evergreen on a Hill Cover Plate Die" that I cut out of blue metallic cardstock. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. A huge kiss and until next time! Laura

News

A Polar Bear Christmas by Laura

by Laura Nistal on Sep 07 2022

Hello everyone!! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this Christmas card that I hope will inspire you! To start I used the "A Polar Bear Christmas" Stamps set that I stamped with "Black Hybrid ink pad" which is perfect for this type of stamps! Then I painted all the images with alcohol markers and then with a white marker I glossed it to make it stand out. Next I prepared the background: I used the "Grunge wall stencil" to which I added red distress ink to simulate some bricks. For the sentiment i use the "Goody Goody Gumdrops" Stamps which I stamped with white ink on a black cardboard. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. A huge kiss and until next time! Laura

News

Christmas card by Laura

by Laura Nistal on Aug 17 2022

Hello everyone!! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this Christmas card that I hope will inspire you! To start I used the "Build me a Gingerbread House" Stamps set that I stamped with "Black Hybrid ink pad" on a white cardboard using it as a background. Then I painted all the images with alcohol markers and then with a white marker I glossed it to make it stand out. Then I glued the white cardboard on top of a black one to make a frame. For the sentiment i use the "Goody Goody Gumdrops" Stamps which I stamped with white ink on a black cardboard. And this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. I remind you that we have the 7 on 7 with a chance every day to win a nice prize!!! Run to see it!! A huge kiss and until next time! Laura

News

More leaves Card by Laura

by Laura Nistal on Jul 27 2022

Hello everyone!! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this fall card that I hope will inspire you! To start I used the "More Maple Leaves", "More Oak Leaves" and "More Ash Leaves" dies that i cut on gold and black cardboard. Next I prepared the background: for this I cut the outside of the leaf dies and used them as a stencil. Then I randomly placed them in the background and painted them with Distress Oxide inks in earth tones. Then I was pasting the leaves on top, but with a little offset to give it a different touch. For the sentiment i cut the "Good day to you word" die on gold cardboard and placed it in the center of the card. And this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. A huge kiss and until next time! Laura

News

Stretching Your Stencils with Ink Lifting featuring Picket Fence Studio's Shadow of Leaves

by Bonnie Crane on Jul 22 2022

I have a set of cards featuring Picket Fence Studio’s GORGEOUS 6 by 6 and Slim Line SHADOW OF LEAVES STENCILS using an easy ink lifting technique.

News

Slimline unicorn card by Laura

by Laura Nistal on Jul 06 2022

Hello everyone!! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this slimline card that I hope will inspire you! To start I used the "Princessland Dear" stamps that I stamped with the "Black Hybrid Ink Pad" and then painted with alcohol markers. Then I used the "Slimline Curvy Rainbow die" which I cut out of various colored card stock. Next I prepared the background: for this I used the "Slimline Die Cutting System Scallop Frames" that I cut in white cardboard and foam to make a shaker card. Inside I put the "Sequins Unicorn Sparkles" that I think combine perfectly with this card. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. A huge kiss and until next time! Laura

News

Happy 4th of July

by Michelle Bala on Jul 03 2022

Hello there! Michelle here, wishing all our fellow American's a very Happy 4th of July! There is still time to shop today's sale and possibly grab the items I used for this card!! I used 3 shades of cardstock, red, white and blue. I die cut the Slim Line Curvy Rainbow Die using the 3 cardstocks. For the blue cardstock, I die cut the slim line scalloped rectangle, Slim Line Scallop Frames, first then I die cut the rainbow inside. I filled the clouds with Stars and Stripes Sequin Mix Plus. I added Happy 4th using the alphabet dies from 5x7 Double Stitched Rectangle Dies. I die cut them using black cardstock and added some shimmer with stickles glitter glue. I assembled the die cut inlay with Extra Wide Foam. Thanks for stopping by! Michelle

News

Easy Inlaid Paper Piecing featuring Picket Fence Studios' Slim Line Rainbow

by Bonnie Crane on Jul 01 2022

I have three card examples using using Picket Fence Studios’ Slim Line Rainbow. This is a gorgeous die with delicate veins between each ray of light. I have a simple trick that makes inlaid paper piecing easy.