News

News

A Wreath for all Seasons!

by Larisa Hohman on Nov 17 2021

Hello! Larisa here and today I'm sharing two holiday cards featuring the NEW A Wreath for all Seasons Stamp! This beautiful stamp is the perfect addition to your cards and it's so versatile! For my first card, I started with a black piece of cardstock and trimmed it to fit an A2 sized card. Then I stamped out my image and heat embossed it with gold embossing powder. On top of that I added a strip of black and white patterned paper from my stash. After stamping and coloring up Beautiful Girl Jill, I die cut her out using the coordinating die and added her to the left of my card with some foam tape. I also tucked a bit of iridescent twine behind her for added texture. A few sequins and a "Merry Christmas" sentiment finish this card off! For my next card, I chose some fun and whimsical colors to work with on this vertical design. I stamped my image out in teal ink on light blue card stock. Then I trimmed it to fit my card base. Then I die cut and paper pieced my little gnome adding some detail with Copic Markers. Across the bottom, I combined two different stamped sentiments in two different colors to add some interest to my card. A few sequins and a fuzzy pom pom on my gnomes had finish this fun little card. Products Used: Beautiful Girl Jill Stamp Beautiful Girl Jill Coordinating Die A Wreath for all Seasons Stamp Sequin Mix Plus - Crafty Friends Fancy Christmas Sentiments Fancy Christmas Sentiments Coordinating Die Billy the Gnome Die A Gnome Christmas Hugs Enclosed Thanks so much for stopping by! Happy Crafting!

News

If You've Got It, Haunt It Tag

by Larisa Hohman on Oct 27 2021

Hello! Larisa here and today, I'm sharing a fun little tag I made using the If You've Got It Haunt It (currently on sale!) and Triple Trouble Stamp Sets! To create my tag, I die cut the smallest scalloped rectangle in deep purple card stock. Then I trimmed a piece of white card stock to fit inside. I stamped out my sentiments and my bats. Then I stamped and colored my witch image. After cutting her out, I added her to the center of the tag along with some gold thread. At the top of the tag, I punched a hole and added some orange ribbon. This tag is quick and easy to make and perfect for added a fun and whimsical touch to your Halloween Treats! Thanks so much for stopping by! Happy Crafting! Products Used: If You've Got It Haunt It Stamp Set Triple Trouble Stamp Set Mini Slim Line Stitched and Scalloped Rectangles Die Cutting System Black Hybrid Ink Pad

News

One Set, Two Ways!

by Larisa Hohman on Oct 06 2021

Hello! Larisa here and today, I'm sharing two very different cards using the same stamp set: Winter Has Come To Town. I love to stretch my supplies and come up with creative ways to use them! Today, I'm showing you how to use one set two ways! For my first card, I stamped out the village scene using black ink. Then I colored it up using Copics. For the sky, I added some distress inks and then popped up my sentiment with foam tape. A pretty simple card that packs a colorful punch! For my second card, I stamped the village scene again, but this time, I used light grey ink. Then I stamped out my sentiment using red ink and used a black pen to add some shadows. I paired the NEW Winter Scene Building People to my scene and colored them up with Copics. A bit of foam tape, helps them stand out in the scene. Then I layered the whole thing on some dark green card stock. I just love that both of the cards use the same stamp set, but look so different! Thanks so much for stopping by! Products Used: Winter Has Come To Town Winter Scene Building People Winter Scene Building People Coordinating Die Black Hybrid Ink

News

Scene Cards with Larisa

by Larisa Hohman on Aug 25 2021

Hello, Larisa here and today I'm sharing a couple of scene cards featuring the New Release! For my first card, I paired the NEW Lots of Christmas Cheer Stamp Set with the NEW Slim Line Our Town Cover Plate Die. To begin, I started with the Scallop Frames Slim Line Die Cutting System and used it to cut a piece of white card stock and a red scalloped piece to mat behind it. Using my Life Changing Blender Brushes, I added some blue distress ink to the background. Then I die cut a piece of black card stock with the Our Town Cover Plate Die. I adhered that to the center of my background piece. Then I tore a piece of white card stock and added that just under the town to mimic the look of snow. I stamped out the grouped animal image, colored it using Copic Markers and cut it out using the coordinating die. Using foam tape, I added it to the right side of the card. On the left side, I stamped my sentiment in black ink. For the final touch, I added several tiny snowflakes from the NEW Santa Is Here Slim Line Die Cutting System Insert. My next card is a fun little back-to-school scene that features two of the little cuties from the NEW Your Next Book Dear Stamp Set. To create this card, I stamped out the NEW Medley of Fall Collage Stamp in red ink on orange paper. Then I trimmed that into a square. Across the bottom, I added a skinny piece of grey card stock. On top of that some die cut grass. Then I stamped out my images, colored them up with Copics, and cut them out using the coordinating dies. I used foam tape to add them to my scene and stamped my sentiment just below. Thank you so much for stopping by! Happy Crafting! Your Next Book Dear Your Next Book Dear Coordinating Die Slim Line Short Grass Die Lots of Christmas Cheer Lots of Christmas Cheer Coordinating Die Slim Line Our Town Cover Plate Die Santa is Here Slim Line Die Cutting System Insert Medley of Fall Collage Stamp Products Used: Scallop Framed Slim Line Die Cutting System Black Hybrid Ink

News

Eiko Girl

by Larisa Hohman on Aug 04 2021

Hello! Larisa here and today, I'm bringing you a bright and colorful card featuring the Beautiful Girl Eiko Girl Clear Stamp Set! To create my card, I started with some colorful patterned paper in my stash and trimmed it to fit the front of my A2 sized card panel. Then I stamped out the BUZZ 4x4 Seamless Stamp, colored it with Copics, and die cut it using a large circle die in my stash. I layered that on top of a bright blue doily and adhered them both to the center of my card. Next, I stamped out the Eiko Girl image, colored her with Copics, and cut her out using the coordinating die. Using foam tape, I added her to the center of the card and layered up some patterned paper strips behind her. A big bold sentiment across the center finished it off. Products Used: Eiko Girl Stamp Set Eiko Girl Coordinating Die Buzz 4x4 Seamless Stamp Favorite Notification Stamp Black Hybrid Ink Pad Thanks so much for stopping by! Happy Crafting!

News

Release Day! The July 2021 Release is AVAILABLE NOW!

by Larisa Hohman on Jul 14 2021

Hello! Larisa here and guess what...it's Release Day!!!!! This month is packed with so many must-have products; you do not want to miss it! Best of all, everything is AVAILABLE in The Shop NOW! Be sure to head over there to check it out! Today, I'm sharing several Halloween cards made with just a hand-full of all the new goodies! All Hallow's Eve is just around the corner and this release is sure to scare up some fun! For my first card, I created a quick and easy shaker using acetate and my sewing machine. I stamped out this ghost image from the Not Scared You Should Be Stamp set and fussy cut it out. Then I adhered it on top of some clear acetate. I sewed that to the top of some orange patterned paper in my stash and before closing it up completely I filled it with some of the new Midnight Tales Sequins Mix. Then I added my sentiment and that's it. Such a quick and easy way to create a shaker, but still makes a big impact! This next card features the new Spider Web Cover Plate Die. This die is so intricate and creates a total wow factor on your projects. To create my card, I started with a piece of black card stock. I die cut the spider web from white glitter paper and adhered it the black. Then I stamped out and colored up Lexi Girl. I used the coordinating die to cut her out and then I layered her on top of my web. Across the bottom of the card I added some strips of patterned paper and layered my sentiment on top. To finish the card off, I added a fun sentiment from the Not Scared You Should Be Clear Stamp Set. I just love how this turned out! My final card features the cutest little monsters. These not-so-scary guys are part of the new You Creep Me Out Clear Stamp Set. To create my card, I used the Scallop Frames Slim Line Die Cutting System. After cutting the layered out of patterned paper and card stock. I layered it all together, creating three shaker windows down the center of the card. I used the NEW Trick Or Treaters Sequin Mix Plus. It is a Must Have! Then I stamped out my images, colored them up with Copics, and cut them out using the coordinating dies. Using foam tape, I popped them onto my card and added a few of the bat die cut from the Slim Line Die Cutting System Witch Insert. Finally, I added my sentiment across the middle and there you have it. You Creep Me Out Clear Stamp Set Slim Line Funky Christmas Envelopes You Creep Me Out Coordinating Dies Slim Line Die Cutting System Witch Insert Not Scared You Should Be Spider Web Cover Plate Die Midnight Tales Sequins Mix Plus Trick Or Treaters Sequins Mix Plus Scallop Framed Slim Line Die Cutting System Lexi Girl Lexi Girl Coordinating Die Gem Pick Up Tool Black Hybrid Ink Thanks so much for stopping by! Happy Crafting!

News

Beautiful Girl Sandra Summer Shaker

by Larisa Hohman on Jun 23 2021

Hello! Larisa here and today I'm sharing a very bright and festive shaker card. This beauty features Beautiful Girl Sandra! I've paired her with the NEW City Lights Sequin mix as well as the Wave Sun Stencil. This card just screams SUMMER to me! To create my card, I started with a piece of yellow card stock. I stenciled my sun pattern onto it using my Life Changing Blender Brushes and some Orange Distress Oxide Ink. Then I trimmed it to fit an A2 sized card and mounted it onto a piece of hot pink card stock. I used my sewing machine to stitch on some tulle and filled it with sequins before stitching it closed Then I stamped out my image, colored her up with Copics, and cut her out using the coordinating dies. Using some foam tape and hot glue, I added her to the center of my card panel. Then I added a stitched paper ribbon just under her and layered my "just because" sentiment on top. I just love how this turned out. It's sure to brighten someone's day! Products Used: More Fancy Sentiments More Fancy Sentiments Coordinating Dies Beautiful Girls Sandra Sandra Girl Coordinating Die Wave Sun Stencil Sequin Mix City of Lights Gem Pick Up Tool Black Hybrid Ink Life Changing Blender Brushes

News

Libra Girl with Larisa

by Larisa Hohman on Jun 02 2021

Hello! Today, I'm sharing a fun zodiac card! This is Libra Girl. As a libra myself, I knew I can to create a card with her. To begin, I started with a piece of white card stock and trimmed it to fit my A2 sized card. Then I used the middle tone of the NEW Paper Glaze Ombre Sky Blues to create a beautiful stenciled design across the paper. I let that dry for an hour or so and worked on my stamped image. I colored her up with Copics, and die cut the image using a large circle die in my stash. Then I placed it on top of my stenciled design and added a stamped sentiment across the bottom. I think this would make such a fun birthday card for that special Libra in you life! Copic Colors: Skin: E000, E00, E11, E04, R20 Hair: Y21, Y26, E87 Blue: B00, B02 Products Used: Fancy Congratulations Sentiments Fancy Congratulations Sentiments Coordinating Dies Libra Girl Paper Glaze Ombre- Sky Blues Mixed Media Spatulas Black Hybrid Ink Center Flower Stencil Thanks so much for stopping by! Have a great day!

News

Beautiful Girl Sierra with Larisa

by Larisa Hohman on Apr 21 2021

Hello! Today, I'm sharing a vibrant, floral card using Beautiful Girl Sierra! This stamp is gorgeous and I had so much fun coloring her up! To begin, I stamped her out in tan ink and colored her up using the no-line coloring technique. Then I die cut her out using the coordinating die. For the background, I used the NEW Beautiful Girls Flower Wreath. I stamped it out, colored it up with Copics, and trimmed it to fit my A2 sized card. Then I added my Sierra image to the center of the wreath using some foam tape. For the flowers in her hair, I wanted them to pop. So I added some of the roses from the Beautiful Girls Flower set. Then I stamped out my sentiment, cut it out with the coordinating die, and popped it across the bottom of my card using foam tape. Some Stickles glitter over the flower images finishes this card off. Products Used: Black Hybrid Ink Beautiful Girls Flower Wreath Fancy Daily Sentiments Fancy Daily Sentiments Coordinating Die Beautiful Girls- Sierra Beautiful Girls Sierra Coordinating Die Beautiful Girl Flowers Beautiful Girl Flowers Coordinating Die

News

Two Eye-Catching Cards with Larisa

by Larisa Hohman on Mar 31 2021

Hello! Larisa here and today, I'm sharing bold and bright cards that are sure to grab your attention. Both feature products from the new release and both have vivid pops of color that catch your attention! My first card features the NEW Mail's Here Stamp. To begin, I stamped out the Raining Envelopes Stamp a couple of times. This Building Backgrounds stamp is perfect because it lines up perfectly. You can stamp it and infinite number of times to create any sized background! I colored my background using a light teal Copic Marker (BG10). Then I added a strip of red polka dot paper to the bottom and trimmed it to fit my card base. I also layered the panel on some light grey card stock and trimmed to fit. For the hello sentiment, I die cut it in bright blue card stock and blue foam. I adhered the two layers together and added them to the card panel just above the polka dot paper. I love the dimension this technique adds! Then, I stamped out the Mail's Here image, colored it up to match, and cut it with the coordinating die. After adhering that to the panel, I also added "my dear friend" sentiment just below it from the More Fancy Sentiments Stamp set. For my next card, I decided to create a shaker card using the NEW Purple-Rita Sequin Mix. I started with a piece of purple card stock and added some tulle to the top of it. I stitched down the sides with my sewing machine and filled it with my sequins. Then I used the Netting Cover Plate to cut a piece of white card stock and I adhered that to my card panel only in the center of the card where I knew the glue would be covered. I stamped out the Lilies For Spring and Kylee Girl images, colored them up, and cut them out using the coordinating dies. I layered them on top of my card panel using foam tape and a bit of hot glue to make sure they were stuck down well. My sentiment from the Job Well Done Set finishes it off! Products Used: Mail's Here Mail's Here Coordinating Die Raining Envelopes Kylee Girl Kylee Girl Coordinating Die Purple-Rita Sequin Mix Lillies For Spring Lilies For Spring Coordinating Die Job Well Done More Fancy Sentiments Clear Stamp More Fancy Sentiments Die Netting Cover Plate Die Slim Line Oversized Hello Word Die Gem Pick Up Tool Black Hybrid Ink Thanks so much for stopping by! Have a great day!

News

Beautiful Girl Madelyn with Larisa

by Larisa Hohman on Mar 10 2021

Hello! Larisa here! Today, I'm bringing you Beautiful Girl Madelyn with some retro vibes. Picket Fence Studios has some of the most beautiful stamps out there! I just love creating with the Beautiful Girls Line. To create my card, I started with some patterned paper and trimmed it to fit the front of my card. Then I layered that on top of some lime green paper and adhered it to my card base. Then I stamped out my image, colored her up with Copics and cut her out using the coordinating die. I centered her on my card panel and added some die cut music notes around her. Then I die cut and layered up the "hey you" word die in coordinating colors. To give it some dimension, I layered it on top of some foam and then added it just below my image. The "break a leg" sentiment from the NEW Ways To Express Yourself Set finishes it off. , Thanks so much for stopping by! Happy Crafting! Copic Colors: E000, E00, E11, E04, R20 Hair: C5, C7, C9 Red: R27, R56, R59 Blue: BG57, C7 Products Used: Hey You Word Die Beautiful Girls- Madelyn Madelyn Girl Coordinating Die Ways To Express Yourself Black Hybrid Ink

News

Slim Line Beautiful Girl Cards with Larisa

by Larisa Hohman on Feb 17 2021

Hello! Larisa here. I hope everyone is keeping warm! Today, I'm sharing two slim line cards featuring the new release and a couple of the beautiful girl stamps. For my first card, I used the Slim Line Die Cutting System to cut my card base. Then I cut a smaller panel from white card stock and used the new Slim Line English Brick Wall Stencil to add a tan brick wall effect. I die cut a circle from the bottom right hand corner and backed with a black mat. I stamped out my beautiful girl image, colored her up with Copics, and die cut her out using the coordinating die. Then I added some gold thread behind her and popped her in the middle of the circle using foam tape. I added the New Seriously Word Die just above the image and stamped my sentiment just below. For my next card, I used The Slim Line Die Cutting System to cut my card panel. Then I used the stencil and some Pink Carnation Paper Glaze to create a soft background on a strip of white card stock. Once it was dry, I trimmed it to fit my panel and adhered it down. Then I heat embossed my sentiment in white sand added a strip of gold glitter card stock. For my image, I stamped her out, colored her up with Copics, and cut her out using the coordinating die. Then I popped her up with foam tape. Products Used: Slim Line English Brick Wall Stencil Slim Line Basket Petals Stencil Bless Your Heart Ways to Express Yourself Pink Carnation Paper Glaze BFF Avery BFF Avery Coordinating Die Beautiful Girl Isabella Seriously Word Die Gem Pick Up Tool Slimline Rainbow Envelopes Black Hybrid Ink Life Changing Blender Brushes Slim Line Die Cutting System Have a great day! Thanks for stopping by!

News

Drink Up: Coffee with Larisa

by Larisa Hohman on Jan 06 2021

Hello! Larisa here and I'm so excited to be starting the new year with one of my favorite images! This beauty is Beautiful Girl Jill. Isn't she fabulous??? To create my card, I stamped my image in light tan ink and colored it up with Copic Markers using the "no line" technique. Then, I die cut it out using the Coordinating Die Set. For the background, I used the Life Changing Blender Brushes and the Evergreens Stencil. Then, I layered my panel on top of some tan card stock and stitched around it. Using foam tape, I added my image to the left side of the card panel. Then I die cut the coffee word die from white and dark brown card stock, layered it up and added it to my card using foam tape as well. Then I tucked in some die cut snowflakes, sequins, and the rest of my sentiment, stamped from the Drink Your Greens Clear Stamp Set. I have to say, I absolutely love how this card turned out! The products so beautifully together and I had a lot of fun creating it! Thank you so much for stopping by! Happy New Year!!! Products Used: Evergreens Stencil Beautiful Girl- Jill Girl Stamp Beautiful Girl- Jill Girl Coordinating Die Coffee Word Die Drink Your Greens Stamp Winter Snowflakes Die Black Hybrid Ink Life Changing Blender Brushes Gin and Tonic Sequin Mix

News

Bright and Colorful Scene Cards with Larisa

by Larisa Hohman on Dec 16 2020

Hello! Larisa here and today, I have two very bright and very colorful scene cards to share with you! For my first card, I paired A Walk in the Park with Bugville. I stamped out my park scene and masked it off. Then I stamped Bugville in the background. I colored up the scene with copics and trimmed it to fit my A2 size card. Then I stenciled in my sun with distress inks. A very vibrant way to say, "hello!" For my second card, I used the Slimline Die cutting system and cut 2 birch tree panel from the center. Then I stenciled in some clouds and stamped my grass on a separate piece of paper. I trimmed that to fit behind my card panel and adhered the two pieces together. Then I mounted that on a piece of teal card stock. I stamped out my flower and leaf images on Copic-friendly card stock and colored them up. Then I die cut them out using the coordinating dies and popped them on top of my card front. The "happy birthday" sentiment across the top finishes it off. Products Used: A Walk in the Park Clear Stamp A Walk in the Park Coordinating Die Corner Sun Stencil Slimline Cloud Coverage Stencil Black Hybrid Ink Life Changing Blender Brushes Slim Line Die Cutting System Bugville Clear Stamp Set A2 Tall Grass and Waves with Tiles and Wood Floors Leaves for Flowers Clear Stamp Set Leaves for Flowers Coordinating Dies Beautiful Girl Flowers Beautiful Girl Flowers Coordinating Die Gin and Tonic Sequin Mix Do Good Recklessly Clear Stamp Thanks so much for stopping by! Have a great day!

News

NEW Slim Line Cards with Larisa

by Larisa Hohman on Nov 25 2020

Hello, hello! Larisa here and today, I'm sharing two fun and easy cards using the new Slim Line Die Cutting System as well as some of the new products from the November Release! All products used are linked below. Be sure to check out the Picket Fence Shop to see all the new goodies! For my first, card, I started with some teal card stock and die cut it using the largest rectangle from the Slim Line Die Cutting System. Then I use the smaller rectangle from a lighter blue card stock. I used the stitched circle die in the set to create random circles on my lighter blue panel. Then I adhered it to the teal piece. I used some of the new snowflake dies to cut snowflakes in various sizes from white card stock, holographic card stock, and glassine paper. Then I layered them on top of my card and adhered with Glossy Accents. I added some scattered sequins throughout the card and finished it off with a sentiment heat embossed in white on black card stock. Such a quick and easy card that really packs a punch! For my next card, I used the new Slim Line Die cutting System and paired it with the new Pet all the Dogs Stamp Set and Coordinating Dies. To begin, I chose a bright blue piece of card stock and die cut it using the largest rectangle in the set. Then, I die cut a piece of white card stock using the smaller rectangle die. I used the picket fence die to cut three openings in my white panel. Then I used the grass die to cut three grass pieces from green card stock. I layered each one behind the picket fence openings and adhered them together. Then I colored up my dogs, cut them out using the coordinating dies, and tucked one of them in between my grass and fence. Then I adhered it all together and popped my dogs on top using foam tape. I stamped my sentiment across the top and added some die cut clouds from the A Spooky Day Stamp and Coordinating Die set. Again, another quick and easy card that's sure to brighten anyone's day! Products Used: Snowflake LaWanda Die Snowflake Alice Die Pet all the Dogs Stamp Pet all the Dogs Coordinating Die A Spooky Day Stamp A Spooky Day Coordinating Die Inside Quotes: Christmas Stamp Moonshine Sequin Mix Winter Snowflakes Die Black Hybrid Ink Slim Line Die Cutting System Hope you have a great week! Thanks so much for stopping by!!

News

A Bee-utiful Release with Larisa

by Larisa Hohman on Oct 14 2020

It's Release Day at Picket Fence Studios!

News

Seamless Stamps with Larisa

by Larisa Hohman on Sep 23 2020

Hello, hello! Larisa here and today, I'm sharing two more cards featuring a couple of the new seamless stamps from the September Release. Be sure to hop over to the shop and check out all the new goodies! For my first card, I used the NEW All Wired Seamless Stamp! How fun is this! I only stamped it one time for my project, but the really cool thing about these seamless stamps is that the match up perfectly and you can stamp them multiple times to create a background in whatever size you want! For my card, I stamped it once, trimmed it into a square and mounted it on a piece of black card stock. I colored it up with my Copic Markers and added a few highlights with my white gel pen. I thought this background would coordinate well with BFF Claire. So I colored her up, cut her out with the coordinating dies, and popped her on top of my card using foam tape. Then I added a "happy birthday" sentiment from the Kylee Boo Stamp Set. I just love how this turned out! Such a fun way to say, "happy birthday." All Wired Seamless Stamp BFF Claire Bundle- Stamp and Die Kylee Boo Stamp Black Hybrid Ink Pad For my next card, I used the NEW Sweater Pattern Maker Stamp. This is another seamless stamp that matches up perfectly when you stamp it multiple times. For my card, I stamped it twice. You can't even tell. It really is seamless! I decided to pair it with the Jill Girl Stamp. I stamped her out first, masked her off and then stamped my background on top. I kept things classic and stamped the pattern in black on white card stock. Then I trimmed it into a rectangle and mounted it to the front of my card base. I removed the mask and colored the image up with Copics. For the sentiment, I used the NEW Fancy Christmas Sentiments Set. I stamped my sentiment on a chunky piece of black card stock and heat embossed it in white. Then I added it to the bottom of my card, and there you have it, one warm and cozy holiday card. Sweater Pattern Maker Stamp Jill Girl Stamp Fancy Christmas Sentiments Stamp Black Hybrid Ink Pad Thank you so much for stopping by! Hope you have a great day!!!

News

Lovely Summer Card with Larisa

by Larisa Hohman on Aug 12 2020

Hello! Larisa here and today I have a lovely summer card to share with you. As school is starting back and summer is winding down, I thought it would be fitting to create a card using this Beautiful Girl Kendyll Stamp and Lovely Word Die. To create my card, I started with some patterned papers in my stash. The background paper is a white ship-lap pattern. I trimmed that to fit the front of my card base. Then I die cut a stitched square from blue striped paper and mounted that on a piece of grey card stock. I adhered that towards the top of my card. Then I trimmed a piece of red polka dot paper and layered that underneath. Using the Lovely Die, I die cut the word from navy blue card stock and layered that on top of a white background layer, cut with the same die set. By the way, I absolutely LOVE this die. I will probably be using it on all sort of cards in the future. Just a head up. LOL. For my image, I stamped the girl out in tan ink on Copic-friendly paper. Then I used Copic Markers to color her in. For her eyes and eyebrows, I used a Copic Multi-liner. After, I was finished coloring, I used the coordinating die to cut her out and popped her on my card using foam tape. I layered the Lovely Word Die on top with foam tape as well. And there you have it. One Lovely Summer Card. Beautiful Girl - Kendyll Kendyll Girl Coordinating Die Lovely Word Die Copic Colors: Skin: E000, E00, E11, E04, R20 Hair: E43, E47, E49 Red: R35, R37, R56, R59 White: W0, W1, W3 White Flower: E50, E53, E33 Green: YG21, YG23, YG25 Brown Drink: E35, E57 Thanks so much for stopping by! Have a great day!