News

Mixing Custom Blends with Paper Glaze - Stencilling Fun! - Picket Fence Studios

News

Mixing Custom Blends with Paper Glaze - Stencilling Fun!

by Lisa Tilson on May 05 2021
Hello everyone, Lisa here today to share two cards using A Rose, some Paper Glaze, Paper Glaze Enhancer and a stencil that I love! Both cards are similar in design, but changed up a little with the sentiments. I had spare Paper Glaze that I had mixed so I couldn't let that go to waste so two background panels were created. I think both these cards would make great Wedding/Engagement cards. One would also be a great all occasion card for your stash.   I started off by taking a panel of Neenah 80lb cardstock and securing the Watercolor Brush Strokes stencil down over the top. I really love this stencil - as I think it adds a very unobtrusive background to your card. Sometimes you don't want the stencil to be the star of the show, but still have it's place on the card and that is what I think this stencil does brilliantly, especially when you use soft colours. I used three colours of Paper Glaze, but my bottom colour is a custom blend of Pink Carnation and Golden Rose. I was attempting to make a coral colour and tried mixing the two together. I wasn't sure it would be what I wanted and I was right, but what it did produce was this GORGEOUS ballet slipper blush colour (bottom 6 or so lines below). I then added some Paper Glaze Enhancer to it, to remove some of the shine and that results in a more textured matt finish. I used the Paper Glaze Enhancer with each of the glazes. So, I applied the mixed blend through the bottom of the stencil with a spatula, cleaned the spatula off and then added Pink Carnation with enhancer above it, and then Snowdrop White with enhancer above that, fading out towards the top and making sure not to have the lines stretching all the way across the card, a more unfinished finish at the top! And as I had some of the custom blend left, I cleaned off the stencil and secured it to another panel and went through the same process.   These were set aside to dry whilst I worked on my main image. I really love A Rose, and thought it would look pretty over the background. So I grabbed some Arches Hot Pressed card and stamped the image twice using Versamark Ink. I applied gold embossing powder and heat set. Both images were watercoloured with Mijello Mission Gold paints and left to dry. For my first card, I popped the rose up with foam tape and I used the Always Word Die with it's shadow die. The shadow was cut from vellum, and the word part was die cut twice from Neenah 80lb cardstock. As I wanted my gold to match the gold of the embossing powder on the rose, I smooshed my Versamark ink pad onto some scrap white cardstock, applied the gold embossing powder and heat set before die cutting the final layer from that. All my layers were then stacked together and adhered over the top. For the second card, I adhered the rose flat onto the panel and then took a strip of vellum which I prepped with an anti static bag. I stamped a greeting from More Fancy Sentiments using Versamark Ink, applied gold embossing powder and heat set. This was then placed over the rose and secured at the back of the panel with tape. Both panels were then adhered flat to a top folding notecard. And that finishes my two cards. I hope that you will try mixing your Paper Glazes - I love the sometimes unexpected blends you can create when you do this. And If you don't have time to use up your spare glaze, you can always pop it into a pot and save it for another day. Picket Fence sells spare containers for this exact reason. Thanks for joining me today. I'll be back soon with another project for you!  
Celebrate Texture - Picket Fence Studios

News

Celebrate Texture

by Angela Bode on Apr 30 2021
Hello!  Happy Friday to you!   Today, I am over at Splitcoaststampers hosting a "texture" challenge.   To create my texture I mixed Golden Rose Paper Glaze with Paper Glaze Enhancer.  I love how easy it is to spread the mixture through the Slimline Broken Fence Stencil!  I used both the SLDC Scallop Frame Dies and the SLDC Nested Rectangle Dies for layering.  The SLDC Systems include so many dies that it makes them great buys!  As an example, the "celebrate" die is included in the Scallop Set! See the photo link at the bottom of this post for the list of dies included in these sets! For a fun embellishment, I die-cut Maple Leaves and painted them with Golden Rose Paper Glaze mixed with water for a little "gold leafing".  Lastly, I sprinkled a few Purple-Rita Sequins.   Thanks for stopping by and have a wonderful weekend!                                                       
Follow your Path - Picket Fence Studios

News

Follow your Path

by Ceal Pritchett on Apr 07 2021
Hey Y'all! It's Ceal here. Today I am sharing a couple slimline cards using some of the amazing March products . First up, I created this shaker card using the Fish for Infinity Slimline stencil, some distress inks, sequins and diecuts.  I started by creating a background using distress inks in Salty Ocean, Mermaid Lagoon and Peacock Feathers.  I used the SLDCS to cut a frame for the shaker. I placed the Fish for Infinity stencil down on the base using Pixie Spray and blended Blueprint Sketch distress ink over it. Next I stamped the  sentiment from the Follow Your Path set which happens to be at a great price right now on the background I had created and added it to the front. Next I created the confetti for the shaker, to do this I die cut several of the whales from the Mermaids of the Sea die set in holographic papers and then added some of the Sharkbite Sequin Mix and the Oceans of Green Gem Mix. For my next card I used the Whales & Mermaids Slimline Stencil and some paper glazes.  For this card I started with a background I created using Salty Ocean, Mermaid Lagoon and Blueprint Sketch distress inks. After the background was dry I placed the Whales & Mermaids Slimline Stencil down with Pixie Spray. I mixed some of the new Paper Glaze Enhancer with Mint Hydrangea Paper Glaze and spread it across the whale part of the stencil, I also watered down some Artemisia Silver Paper Glaze and added it on top to get the blueish gray color. For underneath I mixed some Artemisia Silver with some glitter.     
Elegant cards with Paper Glaze Enhancer by Erica - Picket Fence Studios

News

Elegant cards with Paper Glaze Enhancer by Erica

by Erica Andersson-Burke on Apr 06 2021
1
Hi guys!  It's Erica back on the Picket Fence Studios blog today, with a couple of elegant celebration cards.  Have you heard about the Paper Glaze Enhancer? It's a super cool new thing, that will take your Paper Glazes to a whole new level and give you so many more options to use them. It works by taking down the shine of the Paper Glaze, and it goes kind of matte, which is a fab look. Plus, depending on how much Paper Glaze Enhancer you add, it will stretch your stock of Paper Glaze even further.  For these two cards I have mixed 50/50 Paper Glaze Enhancer with Golden Rose. I have also used the same stencil, and both backgrounds were basically made at the same time by using a, if I may say so myself, awesome technique that I have been working on for a while now. It's a simple concept, but gives you two backgrounds in one go basically. You start by adding your Paper Glaze, with or without the enhancer, to a background through your choice of stencil. For these cards I have used the Floral 6x6 stencil. Then either place another piece of card stock on top of all of this, without removing the stencil first, and "print" by firmly pressing the card stock down.  That's your first print! After removing this, you can either take off the stencil and leave the Paper Glaze textured, or use a spatula to smooth it all out again, before removing the stencil. For these I have actually gotten a third print done, by placing yet another piece of card stock on top of the stencil and printing the negative print by picking up the leftover Paper Glaze from that! Cool, huh?? I know, I don't get out much these days so it doesn't take much to excite me, lol!  When these were completely dry, I cut them down with a scalloped rectangle die to add some interest around the edges, before adhering them to a white card base each.  As these are so simple, yet elegant, I decided to use the Fancy Congratulations Sentiments, with their coordinating dies, to finish them off. I heat embossed a couple of the sentiments in Rich Gold and Rose Gold, before cutting them out and adhering them on top of the cards.  I was contemplating bling, I'm not going to lie... However, at the time of making these I managed to resist the temptation. Although, before I send these out, who knows, a few Fire Gems might make their way onto these!  That's it from me for today, thank you so much for stopping by!  Lots of love and happy crafting from Erica  
Stay Wild Ocean Child - Picket Fence Studios

News

Stay Wild Ocean Child

by Ilina Crouse on Mar 22 2021
Hi everyone! Ilina here. I hope you have been enjoying all the inspiration with the new release. And if you haven't checked it out it's worth doing so.  For my card today I used the Whales and Mermaids slim line stencil.  To make the card I started with a piece of white card stock little larger than slimline card front and ink blended green and blues distress oxide inks. One dried I used the Slim Line Rising Sun stencil and Unicorn White ink to add some detail on top of the distress oxides. Next I die cut the panel using the new Slim Line Nested rectangles dies. Next I mixed 1 to 1 ratio of Paper Glaze Enhancer (I LOVE this stuff) and Cornflower Blue Paper Glaze. Secured the stencil on top (masked around the whale) and applied the Paper Glaze/Enhancer mix. Let it dry. Once dry I stamped the sentiment in black and adhered the panel to a slim line white note card.