News

News

Another Rainbow for all Seasons by Laura

by Laura Nistal on Jul 11 2023

Hello everyone! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this card that I hope will inspire you! To start I used the "Tweet Tweet Friends Stamps” which I stamped with the “Black Hybrid ink pad” and then painted with alcohol markers. Then to give the stamps more relief, I used the white Gelly Roll in the areas where I wanted to give shine and the black Micron Pigma in the areas where I wanted to give more depth. Below I used the “Tweet Tweet Friends Coordinating dies” to cut them out, but you can also carefully cut them out with scissors. Next I prepared the rainbow with the “Another Rainbow for All Seasons Die” that I cut in different colors. I also cut the clouds out of the "Slimline Curvy Rainbow Die” to support the rainbow. For the background I used the “Slimline Cloud Coverage Stencil” to simulate a sky and I painted it with distress inks. And for the sentiment I used a phrase from the “Tweet Tweet Friebds Stamps” that i stamped with the “Black Hybrid ink pad”. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. A huge kiss and until next time!

News

Espresso Yourself by Laura

by Laura Nistal on Jun 15 2023

Hello everyone! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this card that I hope will inspire you! To start I used the "Animal Crackers: caring friends Stamps” which I stamped with the “Black Hybrid ink pad” and then painted with alcohol markers. Then to give the stamps more relief, I used the white Gelly Roll in the areas where I wanted to give shine and the black Micron Pigma in the areas where I wanted to give more depth. Below I used the “Animal Crackers: and caring friends Coordinating dies” to cut them out, but you can also carefully cut them out with scissors. For the background I used a kraft cardboard on where I used the "Our Finest Selection Stamps”. I then aged the edges with Distress "Vintage Photo" ink. For the sentiment I used a phrase from the “Espresso Yourself Stamps” that i stamped with the “Black Hybrid ink pad”. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. A huge kiss and until next time!

News

Christmas card by Laura

by Laura Nistal on Sep 28 2022

Hello everyone!! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this Christmas card that I hope will inspire you! To start I used the "Animal Crackers Christmas Wishes" Stamps set that I stamped with "Black Hybrid ink pad" which is perfect for this type of stamps! Then I painted all the images with alcohol markers and then with a white marker I glossed it to make it stand out. Then i cut out the images using the "Animal Crackers Christmas Wishes" coordinating dies but you can carefully cut them out with scissors if you prefer. Next I prepared the background: for this I used a white cardboard that I painted with distress oxide inks and a green cardboard with which I used the "A2 Evergreen on a Hill Cover Plate Die" to which I then added the snow with the "Paper Glaze Luxe - Arctic Fox". For the sentiment I used the word "Greeting" that comes with the "A2 Evergreen on a Hill Cover Plate Die" that I cut out of blue metallic cardstock. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. A huge kiss and until next time! Laura

News

Thinking of You Shaker Card with Karen Reategui

by Karen Reategui on Oct 07 2021

Hello crafty friends! Today I'm sharing the shaker card featuring the Torch Ginger Tropical Flower Stamp and Die, More Fancy Sentiments Stamp and Dies, Center Flower 6x6 Stencil, Silver Bells Paper Glitz and Iridescent Moonshine Sequin Mix. Let's begin! I started by placing the Flower 6x6 Stencil on top of an A2 panel and applied Silver Bells Paper Glitz using the Mixed Media Spatulas. I removed the stencil and let this panel dry for about 20 minutes. Once the panel was dry, I added a card base at the back using glue. Next, I die cut a frame using two rectangles dies out of peach cardstock. Additionally, I die cut a piece of acetate and adhered it to the back of the frame using double sided tape. This way I created the window for the shaker. Next, I poured the Iridescent Moonshine Sequin Mix on top of the background created with the Silver Bells Paper Glitz. I also adhered foam tape around the window of the shaker, removed the backing paper and placed it on top of the background to close the shaker window. Torch Ginger Tropical Flower Stamp was stamped using Gingerbread Wood Hybrid ink from Scrapbook.com and I colored the image using Copic markers. I die cut this image using the matching die and placed it on top of the shaker background. Finally, my sentiment from More Fancy Sentiments Stamp was stamped using Black Hybrid ink pad and then it was die cut using the coordinating die. I placed the sentiment at the lower part of the card and it was finished. I really hope you enjoyed this card and give it a try. Thanks for stopping by and have a wonderful day. Your friend, Karen

News

Wild Peonies with Karen Reategui

by Karen Reategui on Feb 16 2021

Hello crafty friends! Today I'm sharing this floral slimline card using Aurora Borealis stamp, Wild Peonis stamp set and the new Thank You word die from the February release. I heat embossed this image and added color using Copic markers. Let's start! Using the Slimline Die Cutting System I die cut a layering base from white cardstock and heat embossed on top the Aurora Borealis stamp using WOW! Metallic Gold Embossing Powder. Next, I adhered a white folded slimline card at the back with glue. On a piece of Neenah Classic Crest Solar White 80 lbs. I stamped the Wild Peonies stamp using Black Hybrid ink from Picket Fence Studios and I colored it using Copic markers. I recently damaged two Copic markers while coloring on top of a heat embossed image so from now on I decided to first stamp my image using a Copic friendly ink and then after I finished coloring I can heat emboss. To be able to first stamp the image with ink and then stamp it again in the same place to heat emboss after you finish coloring you will need a MISTI, so don't remove your stamp from the MISTI door. So once I finished coloring I placed my piece of cardstock inside the MISTI again and inked up my image with WOW! Embossing Pad and then I heat embossed it with WOW! Metallic Gold Embossing Powder. I fussy cut this image and added it to my background using foam tape for more dimension, then I trimmed down the parts hanging out of the edges. Additionally, I die cut 5 times the Thank You word die out of white cardstock and once from gold mirror specialty paper. I glued them all with the gold die cut on top and added it to my background next to the flowers. As a final touch I added these new Gem Mixes coming soon to the Picket Fence Studios shop. They matched perfectly the color combination from this card that I had to used them, but they will be part of the March release. I really hope you like this card and give it a try, it's a very easy card and so elegant that I'm sure anyone would love to get it. Thank you so much for stopping by and see you next time. Have a marvelous week. Your friend, Karen

News

Happy Ho Ho Ho to you with Karen Reategui

by Karen Reategui on Nov 18 2020

Hello crafty friends! Today I’m over Picket Fence Studios blog sharing these two Christmas cards. I’m featuring Baker’s Twine and HO HO HO Stamp set. Also Gin & Tonic and Moonshine Sequin Mixes. Let’s begin! For the first card I started by applying distress oxide inks with the Life Changing Blender Brushes to a panel. I used Aged Mahogany, Festive Berries and Abandoned Coral. Once my panel was dry, I trimmed down the edges and adhered a white folded note card at the back. Then, I stamped this large sentiment from Ho Ho Ho Stamp and I heat embossed it with WOW! Red Glitz Embossing Glitter. I repeated this step three times to get a bit more of dimension on my sentiment. Finally, I stamped the images from the Baker’s Twine Stamp and heat embossed them with WOW! Opaque Bright White Embossing Powder. With a red gel pen I filled in the empty spaces of the twine and lastly, I added a few sequins from Gin & Tonic Sequin Mix. For the second card I also applied distress oxide inks with the Life Changing Blender Brushes to another panel. I used Black Soot, Lucky Clover and Cracked Pistachio. When my panel was dry, I trimmed down the edges and adhered a white folded note card at the back using glue. Next, I stamped the sentiment from Ho Ho Ho Stamp and I heat embossed it with WOW! Red Glitz Embossing Glitter. I repeated this step three times to get a bit more of dimension on my sentiment. Last, I stamped the images from the Baker’s Twine Stamp and heat embossed them with WOW! Opaque Bright White Embossing Powder. I filled in the empty spaces of the twine with a red gel pen and finally, I added a few sequins from Gin & Tonic Sequin Mix and this card was finished. Thank you so much crafty friends for stopping by and I hope you like these cards and get some inspiration. Please have a wonderful rest of the week. Blessings, Karen

News

Someone Said Glitter?

by Karen Reategui on Oct 28 2020

Hello friends! Today I’m so happy to be sharing this card full of glitter and it’s literally full of glitter! This technique combines stencil and glitter and it is super fun and it doesn’t take too much time. For this card I’m using the Floral Stencil and Thank You for a being You Stamp Set. Let’s begin! I started by creating the background and I added double sided taped to panel that is 3 1/4 x 4 1/2. Then I removed and saved the release paper. Next, I applied Pixie Spray to my Floral Stencil and placed it on top of my panel. To make sure the stencil is pretty well stuck to my panel and the glitter doesn’t get behind it, I laid down the release paper on top and rubbed the stencil on with a bone folder. Then, I poured some purple glitter on top and I let it go like waterfall over the stencil so all the adhesive showing through the stencil will hold the glitter. You need to tap a little bit the panel the get off the excess and then you placed the release paper on top again and press the glitter into the adhesive using a bone folder. My next step is to carefully remove the stencil and applied the second color of glitter. This time is a bright yellow to make all the flowers pop up from the background. I just poured the glitter on top, shake off the excess and placed the release paper on top again to make sure the adhesive holds the glitter. Finally, I adhered a white folded card note at the back using foam tape for more dimension. I also heat embossed with silver embossing powder the sentiment and placed it at the bottom of my panel and this card is done! I really hope you try this technique is very easy and the results are so amazing! You can’t image how gorgeous this card shines in person. Have a phenomenal rest of the week! Your friend Karen TIP: use super fine glitter for better results.

News

Coffee Awesomeness with Karen Reategui

by Karen Reategui on Oct 09 2020

Hi friends! Today I’m up at Picket Fence Studios Blog sharing this card for all coffee lovers and I’m featuring Coffee Understand Stamp Set and Dies, Coffee Word Die, Favorite Notification Stamp Set and Fancy Flourish Stencil along with WOW! Etched Platinum, WOW! Bahama and WOW! Weathered Gold Embossing Powders. Let’s start! I placed this beautiful and intricate Fancy Flourish Stencil on top of a white A2 panel, applied WOW! Embossing Pad and then heat embossed it with Etched Platinum Embossing Powder. Then, I adhered a white notecard at the back using liquid glue. I die cut a white circle out of cardstock and glued it on my background. Additionally, I stamped two cups from Coffee Understand Stamp Set using LDRS Creative Hybrid Inks and die cut both using the coordinating die. I also, added the cups to my background. Finally, I die cut the Coffee Word Die and heat embossed it using WOW! Bahama Embossing Powder. I put this word die next to the cups. A strip with my sentiment was also placed below and I used Favorite Notification Stamp Set and WOW! Weathered Gold Embossing Powder to heat embossed it. This card is flat so it’s perfect for mailing. I hope you enjoy this card and send good wishes to your coffee lover friends. Have a fabulous weekend and stay safe! Your friend, Karen

News

Christmas Shaker Card with Karen Reategui

by Karen Reategui on Jul 16 2020

Hello my crafty friends! Today I’m sharing this Christmas shaker card over Picket Fence Studios Blog. For this card, I have used new stamps from the July Release HO HO HO and Reindeer Stamps along with Gin & Tonic Sequin Mix. Let’s begin! I die cut this slim panel and applied inks to it using the Life Changing Blender Brushes. Next, with the help of my MISTI I stamped the Reindeer Stamp all across the slim panel using WOW! Embossing Pad and heat embossed it with WOW! Opaque Bright White Embossing Powder. Then, I adhered a piece of cellophane wrap from a sheet of chipboard stickers. I cut the cellophane slightly bigger than my slim panel. Then, I folded every side of the cellophane and secured only three sides at the back of my panel using double sided tape. I added the Gin & Tonic sequins through the side that was still opened and then I closed it with more double sided tape. On a piece of acetate I stamped the HO HO HO Stamp Set using WOW! Embossing Pad and the heat embossed it with WOW! Metallic Silver Embossing Powder. I think this silver matched great the color of the sequins. I also, adhered this piece of acetate to the shaker. Finally, I added a white scalloped slim panel at the back and a red folded note card and my Christmas shaker card was ready! I hope you enjoyed this card and give it a try. Thank you so much for stopping by and have a wonderful day! Karen

News

Loving this May Release with Karen Reategui

by Karen Reategui on May 14 2020

Hi friends! Today I’m over Picket Fence Studios Blog sharing all cards I made for this new release. There’s a whole lot of awesomeness in this May release. I have made several cards and I’ll be showing you how I did one of them. So let’s get started. For this card, I’m featuring the Dad’s Day Stamp that I stamped onto Strathmore Bristol watercolor paper using Black Hybrid ink. Then, I added color using Zig Clean Color Real Brush markers. Once my panel was dry, I added a piece of pattern paper and a black card base at the back using glue. Next, I placed the Quilting Market Stencil by Picket Fence Studios on top of my panel and applied white ink usually a Life Changing Blender Brush. Finally, I stamped and white heat embossed the sentiment from the same Dad’s Day Stamp Set onto black and added to the background plus a few white Nuvo Drops as a final touch and my card was finished. So now let’s see all the cards I made for this awesome release! For this card, I did a no-line coloring for the Nautilus Shell. Then, I created the background using LDRS inks and the Life Changing Blender Brushes from Picket Fence Studios and added Snowdrop White Paper Glaze at the back. I’m in love with this color combination for this nautical card. On this card, I’m using A Rose Stamp, which is absolutely gorgeous. The size of this rose creates a great focal point in your card. I heat embossed all the flowers and leaves using silver embossing powder and also I did a copic coloring. Here I have a shaker card and if you follow me you know how much I love shaker cards. I’m also using A Rose Stamp and you can use this stamp for a Mother’s Day card just like I did it. On these two cards I also did a no-line coloring. I kept these cards very simple and with a black and white backgrounds since I the flowers already had a lot of colors and I wanted them to be the focal point. Next, I have this card featuring the Spliced Heart Stencil. There are many possibilities for this awesome stencil. I simply love this stamp You or WIFI. I even love the name lol. It comes with fabulous sentiments too. And for this card, I did a Copic coloring and kept it very simple since my main idea on this card was to express a very relaxing scene where you can go and unplug! I have a set of two cards and one more below where I’m using Fleur di lis Stencil with a mix of Paper Glaze. And on this card, I actually mixed three different colors of Paper Glaze and created this new color. It could be Red, Carmine, Poppy... You name it! For this card, I also mixed more colors of Paper Glaze and got this awesome coffee color. This stamp set is gorgeous! To the Lovely Couple Stamp Set is perfect for Birthday cards, Weddings and other celebrations. I have heat embossed the cake using gold embossing powder and did a simple Copic coloring. And for my last card I made a shaker card. I also used To the Lovely Couple Stamp Set and white heat embossed the image. Well, these were my cards for this May Release from Picket Fence Studios and I hope I can inspire you a little bit. Remember Picket Fence Studios is having free shipping on all USA orders. Have a phenomenal day my friends! Karen

News

Chin Up. Crown Straight. Face the Day with Karen Reategui

by Karen Reategui on Apr 23 2020

Hello friends! Today I’m over Picket Fence Studios Blog sharing this card where I’m featuring the Geo Pineapple and Pineapple Collage Stencils, Something Sweet Stamp Set for my sentiment, Rose Gold, Daffodil Yellow and Leaf Green Paper Glaze. Let’s begin! I started by placing the Pineapple Collage Stencil on top of a panel and using the Life Changing Blender Brushes I applied the ink. I used the following colors from LDRS Creative: Key Lime Pie, Olive Branch, Lantern Yellow and Iced Tea. They work really awesome by the way! Then, I placed the Geo Pineapple on top of this background and I applied Rose Gold, Daffodil Yellow and Leaf Green Paper Glaze. I spread the paper glaze and also I pat using the same spatula to create more texture. Also, to speed up the drying process I used my heat tool on top and got those wonderful bubbles that completed the texture on this card. Once it was dry I added some Nuvo drops for a final touch on the pineapple. Finally, I stamped the sentiment from Something Sweet Stamp Set using the Black Hybrid ink. I adhered a white card base at the back and this card was finished. I really hope you got some inspiration and try these stencil and paper glaze. Have a wonderful day! Karen

News

Happy Day with Karen Reátegui

by Karen Reategui on Jan 09 2020

Hello friends! Today I’m up at Picket Fence Studios Blog sharing this birthday card using 4 different colors of foils to use with the Picket Fence Studios Happy Day Foiled Impression and Cutting Die. Additionally, for the background I used Points of Interest Stencil and One Year Older Stamp for the sentiment. Let’s start! I placed the Picket Fence Studios Points of Interest Stencil on top of a white panel and applied Distress Oxide inks using Life Changing Blender Brushes. I removed the stencil and let the panel dry. In the next picture you will see the inks used on this card. Once the panel was dry, I trimmed down a little bit the edges and adhered a white card base at the back. Next, using the Gemini Foilpress machine I foiled the Happy Day Foiled Impression Die 4 times with different colors of foil. Then, I die cut all the pieces using the coordinating dies. I stamped on my panel the Happy Birthday sentiment from Picket Fence Studios One Year Older Stamp Set using Hybrid Black ink and heat embossed it using WOW! Embossing Powder. Finally, I added all die cuts on top of the background using foam double sided tape and a few sequins and this card was done. Thank you so much for stopping by and have a marvelous day!!! Karen