News

News

A Magical Lot by Laura

by Laura Nistal on Sep 05 2023

Hello everyone! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this Halloween card that I hope will inspire you! To start I used the "A Magical Lot Stamps” which I stamped with the “Black Hybrid ink pad” and then painted with alcohol markers. Then to give the stamps more relief, I used the white Gelly Roll in the areas where I wanted to give shine and the black Micron Pigma in the areas where I wanted to give more depth. Below I used the “A Magical Lot Coordinating dies” to cut them out, but you can also carefully cut them out with scissors. For the background I used the “A2 Ghost House Cover Plate Die” that I cut in black cardboard and then I prepared a sunset with distress oxide inks in very typical Halloween colors. And for the sentiment I used a phrase from the “A Magical Lot Stamps” that i stamped with the “Black Hybrid ink pad”. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. A huge kiss and until next time!

News

Creepy Hollow Lantern

by Claudia Cubas on Aug 06 2023

Hello all dear friends, Halloween is here and we at Dt have so many inspirations. As you could see the latest release is really spooky and one of my favorite pieces this Creepy Hollow Lantern Dies I created this lantern-shaped shaker card that can stand upright. To decorate it, I chose Embellishment Jars - Pumpkin Patch What does it look like to you? I hope you like it. Greetings to all from Claudia!

News

Another Rainbow for all Seasons by Laura

by Laura Nistal on Jul 11 2023

Hello everyone! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this card that I hope will inspire you! To start I used the "Tweet Tweet Friends Stamps” which I stamped with the “Black Hybrid ink pad” and then painted with alcohol markers. Then to give the stamps more relief, I used the white Gelly Roll in the areas where I wanted to give shine and the black Micron Pigma in the areas where I wanted to give more depth. Below I used the “Tweet Tweet Friends Coordinating dies” to cut them out, but you can also carefully cut them out with scissors. Next I prepared the rainbow with the “Another Rainbow for All Seasons Die” that I cut in different colors. I also cut the clouds out of the "Slimline Curvy Rainbow Die” to support the rainbow. For the background I used the “Slimline Cloud Coverage Stencil” to simulate a sky and I painted it with distress inks. And for the sentiment I used a phrase from the “Tweet Tweet Friebds Stamps” that i stamped with the “Black Hybrid ink pad”. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. A huge kiss and until next time!

News

Espresso Yourself by Laura

by Laura Nistal on Jun 15 2023

Hello everyone! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this card that I hope will inspire you! To start I used the "Animal Crackers: caring friends Stamps” which I stamped with the “Black Hybrid ink pad” and then painted with alcohol markers. Then to give the stamps more relief, I used the white Gelly Roll in the areas where I wanted to give shine and the black Micron Pigma in the areas where I wanted to give more depth. Below I used the “Animal Crackers: and caring friends Coordinating dies” to cut them out, but you can also carefully cut them out with scissors. For the background I used a kraft cardboard on where I used the "Our Finest Selection Stamps”. I then aged the edges with Distress "Vintage Photo" ink. For the sentiment I used a phrase from the “Espresso Yourself Stamps” that i stamped with the “Black Hybrid ink pad”. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. A huge kiss and until next time!

News

June New Release Day! - Espresso Bar Table Dies

by Sammi Offield on Jun 14 2023

Happy New Release Day crafty friends! Sammi here to share a card made with the AMAZING new Scene Building: Espresso Bar Table Dies! I absolutely love this die set! I love the retro feel of the colors red and teal, so I went with that color scheme for my scene and I LOVE it! Here is how I made this card: First, I wanted a wood grained background for my wood wall, so I used the A2 Against the Grain Cover Plate die and then ink blended it with Distress inks. I edged the corners and edges with darker Distress inks to make it looked a little more aged. I then cut out the pieces in the Espresso Bar Table dies - I cut out the table, espresso machine, flower/vase, row of cups, 3 individual cups, and then the bread, donut, bananas, oranges, apple and pear. I then cut out the tier basket out of silver metallic cardstock. I then colored the smaller pieces with Copic markers and edged the espresso machine with Distress inks to make it look vintage. I then ink blended the table with Distress inks and ink edged it too. After that, I placed the table onto the card panel with some foam tape. I then started adding the espresso machine, flower/vase and cups using glue and foam tape. I then glued the fruit and breads into the tier basket and then added it to the table with glue and foam tape. I then decided I wanted to make a poster for the wall from the new Our Finest Selection background stamp so I picked out a image from the background stamp and then cut it down to a square and matted it with some teal cardstock. I then glued it onto the background wall. I then stamped the sentiment from the new Espresso Yourself stamp set with teal ink and then cut it down to size and added it to the card panel with foam tape and then added some bling from the All About the Teals Sequin Mix. After the card panel was complete, I glued it onto a A2 card base. Here is what you need to make this card: https://pfstamps.com/products/espresso-yourself https://pfstamps.com/products/scene-building-espresso-bar-table-dies https://pfstamps.com/products/our-finest-selection A2 Against the Grain Cover Plate Die – Picket Fence Studios (pfstamps.com) Sequin Mix - All about the Teals – Picket Fence Studios (pfstamps.com) Thank you for stopping by and HAPPY SHOPPING!!

News

Seashore Slimline Card

by Heejung Hunsberger on May 12 2023

Welcome, dear crafty friends, to my creative space! As you know, crafting is not only a hobby for me but also a way to relax and let my creativity flow. Today, I am thrilled to share with you my latest project which is sure to transport you to a place of serenity and calm. I present to you a handmade card that showcases a breathtakingly beautiful seascape, brought to life with the use of the Slimline Seashore cover plate die. This particular die has been designed with intricate details that capture the essence of the ocean, making it perfect for your beach-themed projects. I am excited to walk you through the process of creating this card so that you too can enjoy the therapeutic benefits that come with crafting. So, let's dive in and get started! CARD RECIPE: Slim Line Scene Building: Seashore Cover Plate Die Summer Beach Friends Dear Stamp Summer Beach Friends Dear Coordinating Die Scene Building: Sand Stamp I used die-cutting on white card stock with the Seashire slimline cover die, then added color with paper pouncers. A sand stamp complemented the seaside theme, and I stamped the sentiment with versa mark ink and heat embossed it with white powder. I heat set the sentiment for a long-lasting finish. It's rewarding to create something by hand, and this card is no exception! That’s all for today. I hope you enjoyed this post and give you inspiration. Thank you so much for stopping by! Heejung SUPPLIES Affiliate links apply at no extra cost to you. Thank you for your support!

News

Secret garden by Laura

by Laura Nistal on Apr 26 2023

Hello everyone! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this card that I hope will inspire you! To start I used the "Summer Beach Friends Dear Stamps” which I stamped with the “Black Hybrid ink pad” and then painted with alcohol markers. Then to give the stamps more relief, I used the white Gelly Roll in the areas where I wanted to give shine and the black Micron Pigma in the areas where I wanted to give more depth. Below I used the “Summer Beach Friends Dear Coordinating dies” to cut them out, but you can also carefully cut them out with scissors. For the background I used the "Secret Garden A2 Cover Plate Die" die that I cut out of white card and then painted with distress oxide inks. For the grass I used the die "Scene Building: Grassy Hill Die” which I also painted in the same shades of green. For the sentiment I used a phrase from the same set of stamps to which I added white embossing on a black cardboard. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. A huge kiss and until next time!

News

Peekaboo Slider Card featuring the Escape with Me Stamp

by Heejung Hunsberger on Mar 24 2023

Hello Crafty Friends, This Heejung again, I made another peekaboo slider card featuring the Escape with me Stamp (one of the March releases) This time, I made a 5×7 sized card and used the Double Stitched Layering Rectangle Die. I love this beautiful scenery stamp. I want to show the daytime scenery and sunset on the card. This peekaboo slider card can show both sceneries. CARD RECIPE: Escape with Me Stamp @Picket Fence Studios On this Special Day Word Die @Picket Fence Studios 5x7 Double Stitched Layering Rectangle Die @Picket Fence Studios For the Peekaboo Slider Card Tutorial, please click the below PEEKABOO SLIDER CARD TUTORIAL That’s all for today. Thank you for stopping by! I hope you enjoyed this post and give you inspiration. Heejung SUPPLIES Affiliate links apply at no extra cost to you. Thank you for your support!

News

Happy birthday by Laura

by Laura Nistal on Mar 15 2023

Hello everyone! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this card that I hope will inspire you! To begin I cut several cardboard in a rectangular shape, with which I am going to create the gifts. I used different cardboard in pink, fuchsia and craft color to later combine them. I also cut some thin strips to make the gift ribbon. I then used the "A Bow for any reason die" to cut the bows on all the packages. I also used the "A2 Pierced Blanket Cover Plate Die", the "Slimline Trapezoid Spiral Stencil" and the "A Whole Lot Of Polka Dots Stencil" to give texture to some gifts. Then I combined the different colors to make them contrast. For the sentiment I used the word "Happy birthday" that I cut out of pink cardstock. This word comes with the "A2 Full Front Shaker Die". To decorate I added some "Gems mixes fire" to give the card a little more contrast. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. A huge kiss and until next time! Laura

News

Front Pocket Shaped Card

by Claudia Cubas on Feb 13 2023

Hello everyone, today is Monday so we start another week with lots of inspirations, and we are looking forward to the new release tomorrow, we are very excited. Today I have a Front Pocket Shaped Card with this butterfly as the main character. To create my butterfly shaped card I used Soar Butterfly Die. For the base I shaded the color pink and light blue with the stencil Slim Line Sea Scales and for the pocket I chose A2 Pierced Blanket Cover Plate Die . I decorated with Sequin Mix - Beach Vibes. This is a simple but impressive card and can be useful in many occasions, hope you like it!!! And we look forward to seeing you tomorrow for the February release, with lots of creations and news!!! Claudia

News

A Wonderful Butterfly!

by Claudia Cubas on Jan 23 2023

Hello everyone dear PFS friends, today we start the week and I want to bring you my inspiration. It is a card that opens on the front and you can insert a photo or a message, I find it very versatile and simple.To make it I chose the set Soar Butterfly Die with this beautiful butterfly that I shaded with purple, fuchsia and green. I then applied Paper Glaze Luxe - Wandering Gypsy with a brush to give shine to the center of the butterfly and the Paper Glaze - Raw Kale on the outside of the wings. For the base of my card, I first shaded with purple, fuchsia, apple green and yellow, and decorated with the stencil Sea Scales 6x6 Stencil and Paper Glaze Velvet - Duckling Fuzz deluxe. For the sentiment I chose the set A Little Note Word DieI hope you like my inspiration today, see you next time!Claudia

News

Thanks card by Laura

by Laura Nistal on Jan 11 2023

Hello everyone! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this clean and simple card that I hope will inspire you! To start, I cut several pieces of "Layering flora blooming blossoms dies" on white cardboard and then I painted them in different colors with distress oxide inks. I also cut out a few "Layering flora leaves and twigs die" in green cardboard. Next I prepared the background: For this I used the "A2 pierced blanket cover plate die" die that I cut out of white cardboard. For the sentiment I used the "Thx word die" that I cut out of gold cardstock. I also used the "Gems mixed fired" to decorate... Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. Don´t forget to come tomorrow for more Christmas inspiration! A huge kiss and until next time! Laura

News

Christmas Countdown: Christmas wishes by Laura

by Laura Nistal on Dec 22 2022

Hello and welcome to the Christmas countdown on PFS blog! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this christmas card that I hope will inspire you! To start I used the "Animal Crackers Christmas Wishes" Stamps set that I stamped with "Black Hybrid ink pad" which is perfect for this type of stamps! Then I painted all the images with alcohol markers and then with a white marker I glossed it to make it stand out. Then i cut out the images using the "Animal Crackers Christmas Wishes" coordinating dies but you can carefully cut them out with scissors if you prefer. Next I prepared the background: for this I used the stamp "My World Revolves Around You" that I also stamped with "Black Hybrid ink pad" and then painted with alcohol markers. Then I used the "A2 She Said Yes Cover Plate" die to make the frame and painted it with distress oxide inks. For the sentiment I used the "Joy Word Die" that I cut out of metallic red cardstock. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. Don´t forget to come tomorrow for more Christmas inspiration! A huge kiss and until next time! Laura

News

Christmas Countdown: Magical Christmas by Laura

by Laura Nistal on Dec 16 2022

Hello and welcome to the Christmas countdown on PFS blog! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this christmas card that I hope will inspire you! To start I used the "Frolicking Winter Friends" Stamps set that I stamped with "Black Hybrid ink pad" which is perfect for this type of stamps! Then I painted all the images with alcohol markers and then with a white marker I glossed it to make it stand out. Then i cut out the images using the "Frolicking Winter Friends" coordinating dies but you can carefully cut them out with scissors if you prefer. On the other hand, I used the "Jolly Good Rainbow" die and painted each of its parts with Christmas colors. Next I prepared the background: for this I used a white cardboard to which I applied the "Paper Glaze Luxe Artic Fox" along with the "Petals 6x6" stencil. I then glued it onto a black cardstock to create a frame. For the sentiment I used the phrase "Christmas season is magical" on a white cardboard and using black ink. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. Don´t forget to come tomorrow for more Christmas inspiration! A huge kiss and until next time! Laura

News

Fall card by Laura

by Laura Nistal on Nov 09 2022

Hello everyone!! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this fall card that I hope will inspire you! To start I used the "Jolly Christmas Gnome" Stamps set that I stamped with "Black Hybrid ink pad" which is perfect for this type of stamps! Then I painted all the images with alcohol markers and then with a white marker I glossed it to make it stand out. Then i cut out the images using the "Jolly Christmas Gnome" coordinating dies but you can carefully cut them out with scissors if you prefer. Next I prepared the background: for this I used a white cardboard to which I added distress oxide inks in yellow and orange tones, also using the "Shadow of Leaves" stencil. Then I cut some leaves with the "More Oak Leaves" dies and added them to the background. For the sentiment I used the "Fancy Autumn Sentiments" Stamps that I used with the "Black Hybrid ink pad". Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. A huge kiss and until next time! Laura

News

Joyeux Noel Nutcracker

by Michelle Bala on Nov 07 2022

Hello there! Michelle here, sharing a non traditional take on a Nutcracker. while scrolling through Google images, I came across some pastel water colored images I wanted to recreate. This A2 Tall Nutcracker Die, is my FAVORITE new product!!! I used pink, gold, white and black cardstock to dress up the nutcracker. I backed him on vellum cardstock. I dressed up his hat with a holly sprig from Santa's Hot Cocoa Mug Die and used the snowflake die for the background. I inked up the background with distress oxide inks in shades broken china and stormy sky. I added some splashes of water and than some paint splatters. I scattered some Vintage Bulbs Sequin Mix to the background. The sentiment is from the stamp set, Swanky Christmas Sentiments and the coordinating Die. Thanks for stopping by for a peek! Hope you have a great week! Michelle

News

Christmas card by Laura

by Laura Nistal on Sep 28 2022

Hello everyone!! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this Christmas card that I hope will inspire you! To start I used the "Animal Crackers Christmas Wishes" Stamps set that I stamped with "Black Hybrid ink pad" which is perfect for this type of stamps! Then I painted all the images with alcohol markers and then with a white marker I glossed it to make it stand out. Then i cut out the images using the "Animal Crackers Christmas Wishes" coordinating dies but you can carefully cut them out with scissors if you prefer. Next I prepared the background: for this I used a white cardboard that I painted with distress oxide inks and a green cardboard with which I used the "A2 Evergreen on a Hill Cover Plate Die" to which I then added the snow with the "Paper Glaze Luxe - Arctic Fox". For the sentiment I used the word "Greeting" that comes with the "A2 Evergreen on a Hill Cover Plate Die" that I cut out of blue metallic cardstock. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. A huge kiss and until next time! Laura

News

Magical Christmas Shaker!

by Sasha Omoniala on Sep 15 2022

Hello Lovely Crafty Friends, I am Sasha and I am so very honoured to be bringing you this blog post. This is my first time on the blog so please bare with me. I am OBSESSED with shaker cards, honestly I can’t get enough of them!I am equally obsessed with the Picket Fence Studios sequin mixes so a card that features both is perfect! Make sure to check out the reel on the PFS Instagram to get a better idea of this I like to call this type of shaker a floating edge shaker because it is fully transparent, let me know in the comments if you think it should be called something else.I started off by taking a DL plastic card/poly bag. The bag measures 10.5’ long x 4.5’ wide. I cut the card bag down to 6’ long, the width remains the same. I then cut a 6’ long x 4.5’ wide piece of acetate which will go inside the poly bag to add stability. TIP: if the acetate piece doesn’t fit inside the bag, just cut a sliver of it off. I splattered the acetate with white acrylic paint then I stuck down a few sequins from the gorgeous plum pudding mix. Whilst that dried, I took a 5’ x 7’ card base and used the A2 Evergreens on a Hill cover plate to cut the card base down to about 4’ long. I then cut out 4 other die cuts of this cover plate. I ink blended 2 of the die cuts with some Prize ribbon and Wilted Violet distress oxides to create some snowy To assemble the card, I put the acetate into the poly bag then added a bit of the plum pudding sequins before sealing it with double sided tape. I then stuck it down to the inside of the back part of the card base. To cover the tape, I stuck down one of the 4 cover plate panels over the taped area. To the front of the card I took a Santa’s Sleigh Ride snow globe die cut and cut it up so that the sleigh was separate from the houses. I stuck the houses down on the bottom part of the card, in front of the white trees then I propped up the ink blended panel on some foam tape and stuck that over I finished the card off with the ink blended greetings die cut on the front the snowy trees and the ink blended sleigh over the acetate. I think this is a fun way to create a shaker card. It’s so super light and not bulky at all but most importantly it is magical with all those beautiful sequins! There will be a reel over on the PFS Instagram showing another example of an edge shaker and a Full Video Tutorial on my YouTube channel LOVE BUIlDS UP CRAFTS on Friday. Hope to see you there! Crafty hugs, Sasha x

News

Halloween banner with dies!

by Silvana Chambon Scarenzio on Sep 08 2022

Hello! It´s Silvana here with another inspiration post. Is it too early to start thinking about Halloween decor...? Never! The spooky season is around the corner and we need to be prepared. Last release inspired meto make a banner just with dies. Yes! The dies are the most versatile and durable product that we can purchase and we can stretch the use of them in creative ways. For the banner base I used the A2 Haunted Lair Cover Plate die woth a hevy weight black cardstock. The funny ghosts are the Three Ghastly friends die that are perfect for this! In the middle, I put the ghost over the A2 Spooky tree die just to make it more spooky. The Happy Halloween word die was cut three times in different colors made with the incredibles Paper Glaze velvet in Bonfire, Split pea soup and Sea urchin colors. I hope you enjoyed this idea and give it a try! See you soon with more inspiration. Silvana.

News

Gate Fold Wedding Card

by Heejung Hunsberger on Aug 05 2022

Hello! Today, I share a wedding card design featuring the I Do cover Plate die and the Lavish Negative strip die which are release last month. The card size is 4 1/4 x 5 1/2 inches (A2 size) COVER CARD RECIPE Gates- Lavish Strip Die Card Band- Opulent Negative Strip Die (die-embossing) Sentiment on the band- the Fancy Life Events Sentiments Stamp (White embossing powder) & the Fancy Life Events Sentiments Coordinating Die INNER RECIPE Navy Blue Card Stock: 4 x 11 inches Tile Montage Stencil 6 x 6 Add a texture to the background using the Huckleberry Blue Paper Glaze. Word Die- Slim Line I Do Cover Plate Die INSIDE POP-UP Couple Silhouette Die- Slim Line I Do Cover Plate Die Word Die- Slim Line I Do Cover Plate Die I added the pop-up feature inside of the card, it makes more special. I hope you have enjoyed this post. SUPPLIES