News

News

Zodiac girls with Michelle

by Michelle Lupton on May 14 2021

Happy release day! Two of the brand new stamps released today are zodiac signs - Libra Girl and Virgo Girl. I went with a gold theme for Virgo Girl. I coloured her with Copic markers, giving her blonde hair and a gold background (using the Coloring Book Stencil and Distress Oxide Inks). I added some sparkle to her hair and earrings, too. I finished the cards with a sentiment from Fancy Sentiments. For my 2nd card, I used the Centre Flower Stencil with one of the new Paper Glaze trios. I coloured the girl with Copic markers again, and finished with her zodiac sign white embossed onto black cardstock. These are the Copic markers I used for these two images: Make sure you check out the entire release - it's a great one, with a lot of variety - something for everyone! I've linked all of the new products below. Thanks for visiting :)

News

Create Your Own Peace

by Ceal Pritchett on Apr 27 2021

Hello Everyone! It's Ceal. Today I am sharing a zen card with you using two of the new slimline inserts. To create this card I started with a white slimline card base and a panel of white heavystock cut down with the SLDCS Nested Rectangles. I cut out the Tree Insert in the center of the panel and then cut out the Mushroom Insert on both sides. I watercolored all three using Daniel Smith watercolors and added the panel to the base. To finish the card I added a sentiment from the Early Tulips set.

News

Rainbow birthday card with Michelle

by Michelle Lupton on Apr 23 2021

Hello! Michelle here today to share a rainbow card I made using products from this month's release. I inked this card in a most unusual way! I had a very, VERY old ink pad that had a rainbow of colours on a series of little foam pads. The foam had degraded so much that the pad was unusable, so I swiped the pad over some card bases and then scraped the degraded foam off the surface with a stencil scraping tool. (You could achieve the same look by masking off stripes and ink blending heavily with a rainbow inks) I then placed the Details of a Wing stencil over the rainbow card and added white pigment ink using a Life Changing Blender brush. I then stamped the Happy Birthday sentiment from the Inside Quotes: Birthday set in black ink, and adhered a thin strip of black cardstock to cover up the edge of the inked portion of the card. Thanks for visiting :)

News

Beautiful Girl Sierra with Larisa

by Larisa Hohman on Apr 21 2021

Hello! Today, I'm sharing a vibrant, floral card using Beautiful Girl Sierra! This stamp is gorgeous and I had so much fun coloring her up! To begin, I stamped her out in tan ink and colored her up using the no-line coloring technique. Then I die cut her out using the coordinating die. For the background, I used the NEW Beautiful Girls Flower Wreath. I stamped it out, colored it up with Copics, and trimmed it to fit my A2 sized card. Then I added my Sierra image to the center of the wreath using some foam tape. For the flowers in her hair, I wanted them to pop. So I added some of the roses from the Beautiful Girls Flower set. Then I stamped out my sentiment, cut it out with the coordinating die, and popped it across the bottom of my card using foam tape. Some Stickles glitter over the flower images finishes this card off. Products Used: Black Hybrid Ink Beautiful Girls Flower Wreath Fancy Daily Sentiments Fancy Daily Sentiments Coordinating Die Beautiful Girls- Sierra Beautiful Girls Sierra Coordinating Die Beautiful Girl Flowers Beautiful Girl Flowers Coordinating Die

News

Whatever You Decide To Do In Life, Make Sure It Makes You Happy

by Lisa Tilson on Apr 14 2021

Hello everyone, it's Lisa here today on our favourite day of the month - Release Day! And I have two things to share with you - a card using lots of gorgeousness from the new release, plus I have a release reveal video up on my channel which shares all the new items for this month with you, along with my sample cards. If you want to catch the video, then scroll to the end of this post. But first, for my card today, I wanted to use the new Slim Line Scallop Framed Dies set, along with the new Slim Line Details Of A Wing Stencil. For this card, I also used the Monarch Butterfly Insert. So, here is my card! I began by taking an 8.5" x 3.5" panel of white cardstock and laying the Slim Line Details Of A Wing Stencil on top. I secured the card panel from the back using low tack tape. I then took some Distress Inks and blended rainbow colours through it using Life Changing Blender Brushes. Once I'd removed the stencil, I took the smaller scalloped rectangle die from the new SLDS Scallop Framed Dies system and ran the panel through my die cutting machine. Next I took one of the circular frames from the Scallop Framed Die set and cut a window into my ink blended panel. And I kept the resulting thin circular frame as I needed that later on. The two butterflies were cut from the Monarch Butterfly Slim Line Die Cutting Insert. This insert die will actually cut a window/insert into a panel and leave the butterfly intact, but I wanted to separate it out, so I just trimmed it out twice. I could then stack them on top of each other for some dimension. I adhered the ink blended panel to an 8.5" x 3.5" base card and then I glued the tiny circular frame around the window - the one that I had saved from earlier. It finishes off the circular window nicely! The two stacked butterflies were then added in and I decorated them with a few gems from the new Reflections Gem Mix. To finish the card, I took a sentiment from Dance Mode On and stamped it onto white cardstock using Versamark Ink. I applied gold embossing powder, heat set it and then popped it up with foam tape. All the items I have used are listed below. And for those of you that would like to see the release in full, here is the video. I am sure you are going to love all the new stamp sets, dies and stencils!

News

Follow your Path

by Ceal Pritchett on Apr 07 2021

Hey Y'all! It's Ceal here. Today I am sharing a couple slimline cards using some of the amazing March products . First up, I created this shaker card using the Fish for Infinity Slimline stencil, some distress inks, sequins and diecuts. I started by creating a background using distress inks in Salty Ocean, Mermaid Lagoon and Peacock Feathers. I used the SLDCS to cut a frame for the shaker. I placed the Fish for Infinity stencil down on the base using Pixie Spray and blended Blueprint Sketch distress ink over it. Next I stamped the sentiment from the Follow Your Path set which happens to be at a great price right now on the background I had created and added it to the front. Next I created the confetti for the shaker, to do this I die cut several of the whales from the Mermaids of the Sea die set in holographic papers and then added some of the Sharkbite Sequin Mix and the Oceans of Green Gem Mix. For my next card I used the Whales & Mermaids Slimline Stencil and some paper glazes. For this card I started with a background I created using Salty Ocean, Mermaid Lagoon and Blueprint Sketch distress inks. After the background was dry I placed the Whales & Mermaids Slimline Stencil down with Pixie Spray. I mixed some of the new Paper Glaze Enhancer with Mint Hydrangea Paper Glaze and spread it across the whale part of the stencil, I also watered down some Artemisia Silver Paper Glaze and added it on top to get the blueish gray color. For underneath I mixed some Artemisia Silver with some glitter.

News

Ink smooshing lilies with Michelle

by Michelle Lupton on Apr 02 2021

Today, I'm sharing a couple of mixed media cards, that combines Distress Oxide ink smooshing, embossing and copic colouring. So, I had already made my first card when I decided to make a video of it. The 2nd card didn't end up exactly the same, but I went with it anyway! And I made a video showing how I made these cards :) Thanks for visiting :)

News

Two Eye-Catching Cards with Larisa

by Larisa Hohman on Mar 31 2021

Hello! Larisa here and today, I'm sharing bold and bright cards that are sure to grab your attention. Both feature products from the new release and both have vivid pops of color that catch your attention! My first card features the NEW Mail's Here Stamp. To begin, I stamped out the Raining Envelopes Stamp a couple of times. This Building Backgrounds stamp is perfect because it lines up perfectly. You can stamp it and infinite number of times to create any sized background! I colored my background using a light teal Copic Marker (BG10). Then I added a strip of red polka dot paper to the bottom and trimmed it to fit my card base. I also layered the panel on some light grey card stock and trimmed to fit. For the hello sentiment, I die cut it in bright blue card stock and blue foam. I adhered the two layers together and added them to the card panel just above the polka dot paper. I love the dimension this technique adds! Then, I stamped out the Mail's Here image, colored it up to match, and cut it with the coordinating die. After adhering that to the panel, I also added "my dear friend" sentiment just below it from the More Fancy Sentiments Stamp set. For my next card, I decided to create a shaker card using the NEW Purple-Rita Sequin Mix. I started with a piece of purple card stock and added some tulle to the top of it. I stitched down the sides with my sewing machine and filled it with my sequins. Then I used the Netting Cover Plate to cut a piece of white card stock and I adhered that to my card panel only in the center of the card where I knew the glue would be covered. I stamped out the Lilies For Spring and Kylee Girl images, colored them up, and cut them out using the coordinating dies. I layered them on top of my card panel using foam tape and a bit of hot glue to make sure they were stuck down well. My sentiment from the Job Well Done Set finishes it off! Products Used: Mail's Here Mail's Here Coordinating Die Raining Envelopes Kylee Girl Kylee Girl Coordinating Die Purple-Rita Sequin Mix Lillies For Spring Lilies For Spring Coordinating Die Job Well Done More Fancy Sentiments Clear Stamp More Fancy Sentiments Die Netting Cover Plate Die Slim Line Oversized Hello Word Die Gem Pick Up Tool Black Hybrid Ink Thanks so much for stopping by! Have a great day!

News

Live Today

by Lisa Tilson on Mar 24 2021

Hi everyone, Lisa here today to share how I made this slim line shaker using lots of lovely goodies from the fabulous March release. I began by taking the largest of the two rectangle dies from the Slim Line Die Cutting System (8.5" x 3.5") and I die cut a panel of white cardstock. I took the Slim Line Fish For Infinity Stencil and secured it from behind. To the side I laid down a bit of Mint Hydrangea, Succulent Green and Ocean Poppy Paper Glazes onto a glass mat, and then added equal amounts of Paper Glaze Enhancer into each. This turns the Paper Glaze into much for of a matt/textured finish and I love how it looks. I then applied all three of these through the stencil using a spatula from the Mixed Media Spatulas to create an ombre look. These glazes - so so pretty - with our without the enhancer! Hopefully you can see the texture in the picture below. I set it aside to dry and then took two dies from the Slim Line Nested Rectangles Die set and cut a stitched frame from white cardstock. Using double sided tape, I then added some acetate to the back, followed by thin strips of foam tape. The nested rectangles die set works in conjunction with the slim line die cutting system and gives you even more options for creating your cards - the sky is the limit! Once the fish panel was dry, I used double sided tape to adhere it to a base card after stamping a sentiment from BFF Favorite Hello in the top right circular area. For my shaker mix I used the new mix called Aqua Seas and Spring Fling from a few months back - they go beautifully together. I carefully placed a whole bunch of them down over the panel and then removed the backing from the foam tape, placed the acetate panel over the top, securing the sequins inside. I just love the noise that a shaker makes and I adore the paper glazes so this card was really fun to make. I hope that you'll give the Paper Glaze Enhancer a try - it is so fun to stretch the use of the Paper Glaze and create a different look to your card. See you next time!

News

Live life on the sweet side

by Michelle Lupton on Mar 12 2021

Hello! It's Michelle here to share a card using a colour scheme I usually associate with Christmas! The white card base is inked with some green ink over the Triple Weave stencil. I added a strip of green cardstock from my stash and then stamped the sentiment. I stamped and coloured the dragonfruit with Copic markers, before cutting them out and arranging them on the card front. Thanks for visiting :)

News

Beautiful Girl Madelyn with Larisa

by Larisa Hohman on Mar 10 2021

Hello! Larisa here! Today, I'm bringing you Beautiful Girl Madelyn with some retro vibes. Picket Fence Studios has some of the most beautiful stamps out there! I just love creating with the Beautiful Girls Line. To create my card, I started with some patterned paper and trimmed it to fit the front of my card. Then I layered that on top of some lime green paper and adhered it to my card base. Then I stamped out my image, colored her up with Copics and cut her out using the coordinating die. I centered her on my card panel and added some die cut music notes around her. Then I die cut and layered up the "hey you" word die in coordinating colors. To give it some dimension, I layered it on top of some foam and then added it just below my image. The "break a leg" sentiment from the NEW Ways To Express Yourself Set finishes it off. , Thanks so much for stopping by! Happy Crafting! Copic Colors: E000, E00, E11, E04, R20 Hair: C5, C7, C9 Red: R27, R56, R59 Blue: BG57, C7 Products Used: Hey You Word Die Beautiful Girls- Madelyn Madelyn Girl Coordinating Die Ways To Express Yourself Black Hybrid Ink

News

Strelitzia card by Michelle

by Michelle Lupton on Feb 19 2021

Hello! When I'm not making cards, I'm a bona fide science nerd, so this Bird of Paradise (otherwise known as Strelitzia) stamp brings out the botany nerd in me. This flower is not a flower - it is an inflorescence, which is a bunch of flowers. In this case, the individual flowers bloom one after the other in a series. They are pollinated by birds, who stand on the blue part of the flower, exposing the sticky pollen that coats their feet and that then gets carried to the next inflorescence. If you're not bored yet, I made this card by stamping the main image and colouring it with Copic markers. I used a dark blue card base, inked with the Flowers Stencil and white pigment ink. Thanks for visiting :)

News

Slim Line Beautiful Girl Cards with Larisa

by Larisa Hohman on Feb 17 2021

Hello! Larisa here. I hope everyone is keeping warm! Today, I'm sharing two slim line cards featuring the new release and a couple of the beautiful girl stamps. For my first card, I used the Slim Line Die Cutting System to cut my card base. Then I cut a smaller panel from white card stock and used the new Slim Line English Brick Wall Stencil to add a tan brick wall effect. I die cut a circle from the bottom right hand corner and backed with a black mat. I stamped out my beautiful girl image, colored her up with Copics, and die cut her out using the coordinating die. Then I added some gold thread behind her and popped her in the middle of the circle using foam tape. I added the New Seriously Word Die just above the image and stamped my sentiment just below. For my next card, I used The Slim Line Die Cutting System to cut my card panel. Then I used the stencil and some Pink Carnation Paper Glaze to create a soft background on a strip of white card stock. Once it was dry, I trimmed it to fit my panel and adhered it down. Then I heat embossed my sentiment in white sand added a strip of gold glitter card stock. For my image, I stamped her out, colored her up with Copics, and cut her out using the coordinating die. Then I popped her up with foam tape. Products Used: Slim Line English Brick Wall Stencil Slim Line Basket Petals Stencil Bless Your Heart Ways to Express Yourself Pink Carnation Paper Glaze BFF Avery BFF Avery Coordinating Die Beautiful Girl Isabella Seriously Word Die Gem Pick Up Tool Slimline Rainbow Envelopes Black Hybrid Ink Life Changing Blender Brushes Slim Line Die Cutting System Have a great day! Thanks for stopping by!

News

The Sleeping Tree

by Michelle Lupton on Jan 29 2021

As soon as I saw this new stamp from Picket Fence Studios, I saw it as a rainbow. I stamped and white embossed the image from The Sleeping Tree, then added colour using Zig markers and a water brush. I added a stamped sentiment form BFF Favorite Hello Thanks for visiting :)

News

NEW Slim Lines with Larisa

by Larisa Hohman on Jan 27 2021

Hello! Larisa here! Today, I'm sharing a couple of slim line cards using some of the new goodies from the January Release! Slim line cards are all the rage right now and Picket Fence Studios has you covered! So many stencils, dies, and even envelopes! It's your on-stop-shop for all your slim line needs!!! For my first card, I used the NEW Slim Line Ocean Waves Cover plate. However, instead of creating waves with it, I die cut it from glitter white card stock and made snow! I love that it's so versatile! I layered my glitter panel on top of some white card stock cut with the Slim Line Die Cutting System and added some die cut snowflakes throughout the scene. For my gnomes, I stamped them out, trimmed them apart, colored them with my Copics, and tucked them into the hills of my snow banks. Then I added some of the NEW Spring Fling Sequins and Purple Side of a Rainbow Gems to give it some sparkle. I stamped my sentiment from the More Fancy Sentiments Stamp Set and die cut it out with the coordinating dies (this is one of my favorite sets, by the way! Love it!). Then I popped it on top of my card with some foam tape for added dimension. For my next card, I created a vertical slim line card. To begin, I die cut a piece of white card stock using the Slim Line Die Cutting System. I die cut a smaller rectangle from white card stock as well and used the NEW The Sleeping Tree Stamp Set to stamp my tree in the center. Then I used some distress inks and the NEW 52 Layers of Clouds Stencil to create my background, careful not to cover the center of my tree image. I colored that in with Copics. Then I die cut some Tall Grass and adhered that to the bottom of the image. I added some of the NEW Fire Gem Mix to my image, matching the colors with the distress inks in the clouds. Then I stamped my sentiment from the Fancy Christmas Sentiments Stamp Set. I used the coordinating dies to cut it out and added it to the bottom of my scene. Products Used: Fancy Christmas Sentiments Die Set Fancy Christmas Sentiments Stamp Set Gem Mixes- Fire Gem Mixes- Purple Side of a Rainbow Spring Fling Sequin Mix Gem Pick Up Tool 52 Layers of Clouds Stencil Slimline Tall Grass Die Slim Line Ocean Waves Cover Plate Die The Sleeping Tree Stamp Winter Snowflakes Baby, It's Cold Outside More Fancy Sentiments Clear Stamp More Fancy Sentiments Die Slimline Rainbow Envelopes Black Hybrid Ink Life Changing Blender Brushes Slim Line Die Cutting System Have a great day! Thanks for stopping by!

News

Drink Up: Coffee with Larisa

by Larisa Hohman on Jan 06 2021

Hello! Larisa here and I'm so excited to be starting the new year with one of my favorite images! This beauty is Beautiful Girl Jill. Isn't she fabulous??? To create my card, I stamped my image in light tan ink and colored it up with Copic Markers using the "no line" technique. Then, I die cut it out using the Coordinating Die Set. For the background, I used the Life Changing Blender Brushes and the Evergreens Stencil. Then, I layered my panel on top of some tan card stock and stitched around it. Using foam tape, I added my image to the left side of the card panel. Then I die cut the coffee word die from white and dark brown card stock, layered it up and added it to my card using foam tape as well. Then I tucked in some die cut snowflakes, sequins, and the rest of my sentiment, stamped from the Drink Your Greens Clear Stamp Set. I have to say, I absolutely love how this card turned out! The products so beautifully together and I had a lot of fun creating it! Thank you so much for stopping by! Happy New Year!!! Products Used: Evergreens Stencil Beautiful Girl- Jill Girl Stamp Beautiful Girl- Jill Girl Coordinating Die Coffee Word Die Drink Your Greens Stamp Winter Snowflakes Die Black Hybrid Ink Life Changing Blender Brushes Gin and Tonic Sequin Mix

News

A Merry Christmas Walk and More

by Angela Bode on Dec 25 2020

Hello, everyone! Merry Christmas to all those who celebrate and Happy Everything to those who simply celebrate the every day! After enjoying a celebration meal it's always nice to take a walk so I created a fun scene with park-goers doing just that! First, I created an outdoor scene with the Slimline Die Cutting system. I layered the tree die cut for a fun film strip-type scene. After cutting the trees, I stamped warm colors using a ink and a paper towel. Next, I sponged the clouds with Life Changing Blender Brushes and the Slimline Cloud Coverage Stencil. I stamped the characters from the More Walk in the Park set and die cut them with the Coordinating Dies. Here is a close up of the Red Hat Society Ladies. In this scene we have a dog walker meeting a cat! You know I had to include that cat! And in the bottom square we have a couple of friends sharing an ice cream treat. I think they are enjoying a Christmas walk somewhere warm! Next up, I have a tip to share when using the Slimline Die Cutting System. Don't toss the die cut squares and circles when using the Die Cutting System! They can be used as design elements in future projects as I did with this card. First, I blended ink with the Life Changing Blender Brushes and the Slimline Waves Stencil. Next, I colored the Leaves For Flowers and die cut them out with the Coordinating Die. I grabbed one of the circles I have saved from previous Slimline Die Cutting System layouts and stamped the birthday sentiment from Do Good Recklessly. Did you know that Picket Fence Studios now carries the MISTI? The MISTI is one tool I can't do without. I use it for every project! I hope you enjoyed viewing samples featuring the December Release! You can find the entire December Release HERE! Thanks for stopping by!

News

Bright and Colorful Scene Cards with Larisa

by Larisa Hohman on Dec 16 2020

Hello! Larisa here and today, I have two very bright and very colorful scene cards to share with you! For my first card, I paired A Walk in the Park with Bugville. I stamped out my park scene and masked it off. Then I stamped Bugville in the background. I colored up the scene with copics and trimmed it to fit my A2 size card. Then I stenciled in my sun with distress inks. A very vibrant way to say, "hello!" For my second card, I used the Slimline Die cutting system and cut 2 birch tree panel from the center. Then I stenciled in some clouds and stamped my grass on a separate piece of paper. I trimmed that to fit behind my card panel and adhered the two pieces together. Then I mounted that on a piece of teal card stock. I stamped out my flower and leaf images on Copic-friendly card stock and colored them up. Then I die cut them out using the coordinating dies and popped them on top of my card front. The "happy birthday" sentiment across the top finishes it off. Products Used: A Walk in the Park Clear Stamp A Walk in the Park Coordinating Die Corner Sun Stencil Slimline Cloud Coverage Stencil Black Hybrid Ink Life Changing Blender Brushes Slim Line Die Cutting System Bugville Clear Stamp Set A2 Tall Grass and Waves with Tiles and Wood Floors Leaves for Flowers Clear Stamp Set Leaves for Flowers Coordinating Dies Beautiful Girl Flowers Beautiful Girl Flowers Coordinating Die Gin and Tonic Sequin Mix Do Good Recklessly Clear Stamp Thanks so much for stopping by! Have a great day!

News

Slimlines and Gel Press with Ceal

by Ceal Pritchett on Dec 02 2020

Hey Y'all! It's Ceal and today I am sharing some slimline cards that uses the Slim Line Die Cutting System along with the Gel Press. Can you believe that it is December already? I have to get moving on my Christmas cards so I made 4 using this technique that I learned from Lydia. To create these cards, I cut out some of the snowflakes from the Winter Snowflakes die set, the Lydia snowflake die and the LaWanda snowflake dies out of copy paper. I places some acrylic paint on the Gel Press and brayered over it. Next I placed the snowflakes down on top of the paint and placed the sheet of copy paper over it and gently rubbed over the entire Gel Press. I lifted the copy paper for the print and then removed the snowflakes so I could reuse them. The paint colors I used on the blue were Peacock, Sky and Turquoise all by Dina Wakley. The paint colors I used on the green card were Peacock and Lemon and when I ran the brayer over them it became green. The last two cards I used the holy trinity as lydia refers to it, Magenta, Lemon and Turquoise. On every card I used the large and smaller rectangle die from the Slim Line Die Cutting System. I love how using your dies as stencils and masks as I have on my cards, stretches your dies. I hope you have enjoyed this post and if you don't have a Gel Press, that you would invest in one. they are so fun! Below you will find links to the products used. Click the picture to start shopping. Compensated Affiliate links are used at no additional cost to you. Your support helps me to keep bringing you new projects and I appreciate that so much! Thank you!

News

NEW Slim Line Cards with Larisa

by Larisa Hohman on Nov 25 2020

Hello, hello! Larisa here and today, I'm sharing two fun and easy cards using the new Slim Line Die Cutting System as well as some of the new products from the November Release! All products used are linked below. Be sure to check out the Picket Fence Shop to see all the new goodies! For my first, card, I started with some teal card stock and die cut it using the largest rectangle from the Slim Line Die Cutting System. Then I use the smaller rectangle from a lighter blue card stock. I used the stitched circle die in the set to create random circles on my lighter blue panel. Then I adhered it to the teal piece. I used some of the new snowflake dies to cut snowflakes in various sizes from white card stock, holographic card stock, and glassine paper. Then I layered them on top of my card and adhered with Glossy Accents. I added some scattered sequins throughout the card and finished it off with a sentiment heat embossed in white on black card stock. Such a quick and easy card that really packs a punch! For my next card, I used the new Slim Line Die cutting System and paired it with the new Pet all the Dogs Stamp Set and Coordinating Dies. To begin, I chose a bright blue piece of card stock and die cut it using the largest rectangle in the set. Then, I die cut a piece of white card stock using the smaller rectangle die. I used the picket fence die to cut three openings in my white panel. Then I used the grass die to cut three grass pieces from green card stock. I layered each one behind the picket fence openings and adhered them together. Then I colored up my dogs, cut them out using the coordinating dies, and tucked one of them in between my grass and fence. Then I adhered it all together and popped my dogs on top using foam tape. I stamped my sentiment across the top and added some die cut clouds from the A Spooky Day Stamp and Coordinating Die set. Again, another quick and easy card that's sure to brighten anyone's day! Products Used: Snowflake LaWanda Die Snowflake Alice Die Pet all the Dogs Stamp Pet all the Dogs Coordinating Die A Spooky Day Stamp A Spooky Day Coordinating Die Inside Quotes: Christmas Stamp Moonshine Sequin Mix Winter Snowflakes Die Black Hybrid Ink Slim Line Die Cutting System Hope you have a great week! Thanks so much for stopping by!!