News

Another Rainbow for all Seasons by Laura - Picket Fence Studios

News

Another Rainbow for all Seasons by Laura

by Laura Nistal on Jul 11 2023
Hello everyone! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this card that I hope will inspire you!  To start I used the "Tweet Tweet Friends Stamps” which I stamped with the “Black Hybrid ink pad” and then painted with alcohol markers. Then to give the stamps more relief, I used the white Gelly Roll in the areas where I wanted to give shine and the black Micron Pigma in the areas where I wanted to give more depth. Below I used the “Tweet Tweet Friends Coordinating dies” to cut them out, but you can also carefully cut them out with scissors. Next I prepared the rainbow with the “Another Rainbow for All Seasons Die” that I cut in different colors. I also cut the clouds out of the "Slimline Curvy Rainbow Die” to support the rainbow. For the background I used the “Slimline Cloud Coverage Stencil” to simulate a sky and I painted it with distress inks. And for the sentiment I used a phrase from the “Tweet Tweet Friebds Stamps” that i stamped with the “Black Hybrid ink pad”. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. A huge kiss and until next time!
Skipping rope with friends by Laura - Picket Fence Studios

News

Skipping rope with friends by Laura

by Laura Nistal on May 24 2023
Hello everyone! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this card that I hope will inspire you!  To start I used the "Skipping rope with friends Stamps” which I stamped with the “Black Hybrid ink pad” and then painted with alcohol markers. Then to give the stamps more relief, I used the white Gelly Roll in the areas where I wanted to give shine and the black Micron Pigma in the areas where I wanted to give more depth. Below I used the “Skipping rope with friends Coordinating dies” to cut them out, but you can also carefully cut them out with scissors. For the background I used a white cardboard on which I used the “Cloud Coverage stencil” to draw the clouds... For the grass I used the die "Scene Building: Grassy Hill Die” which I also painted in the same shades of green. For the sentiment I used a phrase from the same set of stamps that i stamped with the “Black Hybrid ink pad”. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. A huge kiss and until next time!
Birthday card by Laura - Picket Fence Studios

News

Birthday card by Laura

by Laura Nistal on Feb 22 2023
Hello everyone! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this card that I hope will inspire you!  To start I used the "Peter bunny and Friends" Stamps set that I stamped with "Black Hybrid ink pad" which is perfect for this type of stamps! Then I painted all the images with alcohol markers and then with a white marker I glossed it to make it stand out.  Then i cut out the images using the "Peter bunny and Friends" coordinating dies but you can carefully cut them out with scissors if you prefer. Next I prepared the background: for this I used the "Plumeria Flowers 6x8" stencil that I painted with distress inks in a corner of the card. For the sentiment I used a phrase from the same set of stamps that I cut out of white cardstock. To decorate I added some "Gems mixes fire" to give the card a little more contrast. Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. A huge kiss and until next time! Laura
The "Tact vs Sarcasm" Clean and Simple Cards. - Picket Fence Studios

News

The "Tact vs Sarcasm" Clean and Simple Cards.

by Evgeniya Ishbul’dina on Feb 03 2023
Happy Friday! Eugy here, and I have two card ideas for you today! The single layer one and the shaker one! Both showcasing fun sentiment stamp set called "Tact vs Sarcasm". My first card is very easy to create. I paired the sentiment I liked with the Karma Girl: Suzy and Mary stamp. To make it unique, I made rainbow blending using the Life Changing Blender Brushes.   And I wanted to create a second card with a shaker. I filled it with the Sequin Mix Plus - Fish Food, and used the Petals 6x6 Stencil for the background. And as a final touch, I created a sentiment using an embossing technique and white powder on a transparent film. Have a great weekend and happy crafting!Eugy
Thanks card by Laura - Picket Fence Studios

News

Thanks card by Laura

by Laura Nistal on Jan 11 2023
Hello everyone! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this clean and simple card that I hope will inspire you!  To start, I cut several pieces of "Layering flora blooming blossoms dies" on white cardboard and then I painted them in different colors with distress oxide inks. I also cut out a few "Layering flora leaves and twigs die" in green cardboard. Next I prepared the background: For this I used the "A2 pierced blanket cover plate die" die that I cut out of white cardboard. For the sentiment I used the "Thx word die" that I cut out of gold cardstock. I also used the "Gems mixed fired" to decorate... Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. Don´t forget to come tomorrow for more Christmas inspiration! A huge kiss and until next time! Laura
Fall card by Laura - Picket Fence Studios

News

Fall card by Laura

by Laura Nistal on Nov 09 2022
Hello everyone!! I'm Laura and I'm very excited to be here again on the Picket Fence Studios blog showing this fall card that I hope will inspire you!  To start I used the "Jolly Christmas Gnome" Stamps set that I stamped with "Black Hybrid ink pad" which is perfect for this type of stamps! Then I painted all the images with alcohol markers and then with a white marker I glossed it to make it stand out.  Then i cut out the images using the "Jolly Christmas Gnome" coordinating dies but you can carefully cut them out with scissors if you prefer. Next I prepared the background: for this I used a white cardboard to which I added distress oxide inks in yellow and orange tones, also using the "Shadow of Leaves" stencil. Then I cut some leaves with the "More Oak Leaves" dies and added them to the background. For the sentiment I used the "Fancy Autumn Sentiments" Stamps that I used with the "Black Hybrid ink pad". Finally I prepared the composition, glued all the pieces and this is how the result was! I hope you like it and that it inspires you, I remember that you can find all these products and many others in the Picket Fence Studios store. A huge kiss and until next time! Laura
A Polar Bear Winter Celebration scene card - Picket Fence Studios

News

A Polar Bear Winter Celebration scene card

by Evgeniya Ishbul’dina on Sep 30 2022
Happy Friday, friends! Eugy here! Today I’m sharing a quick New Year themed card featuring stamp set called A Polar Bear Winter Celebration from the September release! After I prepared a blended background using Life Changing Blender Brushes, I created some light accent using the Winter Rings 6x6 Stencil and some darker inks.  Then I made a shaker and filled it with gorgeous A Classic Christmas Sequin Mix.  After that I stamped, die-cutted and colored these two cuties from stamp set. I love how this new year celebration scene turned out, soo cute!  Happy crafting and have a great weekend! Eugy 
Birthday card featuring When Birthday Pigs Fly stamp - Picket Fence Studios

News

Birthday card featuring When Birthday Pigs Fly stamp

by Evgeniya Ishbul’dina on Jun 17 2022
Happy Friday! Eugy here! I’m sharing this super fun and simple card I made with the When Birthday Pigs Fly stamp set from new release! After I stamped and colored my main image, I diecutted a window in card panel using die from Slim Line Die Cutting System. Than I added some color to card base using Life Changing Blender Brushes and dye inks. So everything was ready to create a shaker and I filled it with new Oink Oink sequin mix. And at the end I stamped the sentiment and added 3d foam to little pig die-cut. I hope you enjoy this card and if you need more inspiration, there is 7in7 event on PFT Facebook community page. Happy crafting and have a great weekend! Eugy
Embrace The Day - Picket Fence Studios

News

Embrace The Day

by Lisa Tilson on Apr 13 2022
Hello there, Lisa here with you today to share a card using the Full Round Tree Die and I paired it with a sentiment from an older set called Face The Sun I started by taking two panels of 110lb white cardstock and adding some Stick It Adhesive onto the back of them. Taking the Full Round Tree Die, I then ran each panel through my Gemini Junior a few times as it is an intricate die. I must have been feeling very brave when I decided to cut two of them and stack them together! But I went ahead with it anyway. I adhered the die cuts together gradually working my way around the tree and poking any excess out with my craft pick! This did take some time as you probably would have guessed. However, it really did make a difference having some dimension to the tree and if I had had a bit more patience, I would have die cut a third and added it on top. I think having a bit of dimension really helps to make it stand out from the cardstock behind. For the background I selected five different coloured cardstocks. I used Concord & 9th Peacock, Oceanside and Sprout, Lawn Fawn Cilantro and Hero Arts Kiwi. I cut these into jaunty triangles with my paper trimmer. This wasn’t as simple as you’d think either. I am sure there must be a quicker (and easier) way to cut them but mine took a while and involved all sorts of pencil lines here there and everywhere. Still, I loved it at the end, so that was also worth the time and I don’t think I have ever created a background like this before! All the triangles were adhered flat onto a panel of white cardstock that I then added to a top folding A2 base card. The tree stack was then added on top with wet adhesive. I stamped a sentiment from Face The Sun onto black cardstock, added some White Detail Embossing Powder and heat set. I trimmed it out and popped it up with foam tape. A labour of love for sure – not that you would know it. It looks so simple! Thank you for joining me today. I hope that you have a good day, and happy crafting!

News

Happy Birthday Carnations

by Michelle Bala on Mar 20 2022
1
Hello there! Michelle here, sharing a quick CAS design using the stamp set Carnation Flower Garden, and it's Coordinating Die. I colored the flowers with Copic Markers in shades R22, R24, R59 (petals); G09, G29 (stems, leaves). Next, I die cut the sentiment word, Happy Birthday Word Topper Die, using black cardstock. I embossed the lower portion of the die with a sentiment from the stamp set, Word Die Topper Subtitles.  I adhered the the flowers and word topper die cuts with some Extra Wide Foam. That's all for today, pretty short and sweet! I hope you enjoy! Michelle  
Wishing for Butterfly Season - Picket Fence Studios

News

Wishing for Butterfly Season

by Nancy Thomas on Mar 16 2022
Nancy here to share a card using some of the new products from the fabulous new April release. Winter is not letting go yet but I am trying to think of the flowers and butterflies in our future.     I used the new Flying Butterfly die which is an addition to the Slim Line Cutting System to create this clean and simple shaker card. I also used the Extra Wide Foam Roll which is so easy to use since it has double sided adhesive. I filled the shaker space with the also new Heart Breaker Sequin Plus Mix. There were a lot of fun new sequin sets in this release but I think this one might be my favorite. I added a small flower atop the butterfly which came from the new Carnation Flower Garden set as did the sentiment white embossed onto a black card strip. A tiny sequin atop the flower finished it up.   Don't forget the 7 in 7 Event tonight at 6pm CDT on the Picket Fence Studios Community Facebook page. Hope to see you there!
Everyone sends Lots of Love with Julia - Picket Fence Studios
I Dream In Salt Water - Picket Fence Studios

News

I Dream In Salt Water

by Lisa Tilson on Jan 11 2022
Hello there! Today I have a card for you featuring Pisces Girl, which was released last month. She is the latest in the Horoscope Girls range and I had to ink her up as I have a birthday in February and am therefore a Pisces girl! All the Horoscope girls are fun to colour. They have amazing hair and in Pisces Girl you can see she has lots of little fish in her hair - so cute! I began by stamping her onto white cardstock using Black Hybrid Ink. I coloured her with Copics and cut her out with the coordinating die. The Copic numbers are listed below if you are interested. For my background I took a panel of white cardstock and the Taylored Expressions Rectangle Masking Stencil. I secured the stencil to my panel from behind using Frog Tape. In the A2 Tall Grass And Waves With Tile & Wood Floors stamp set, there is a wave stamp which I thought would fit well on my card today. So I took that and stamped it onto my panel, from top to bottom, using Versamark Ink. I removed the stencil, applied HA White Detail Embossing Powder and heat set. I reattached the stencil once more and then using Life Changing Blender Brushes I blended Distress Oxides from top down. I used Chipped Sapphire, Prize Ribbon, Mermaid Lagoon and Salvaged Patina. I deliberately didn't blend the ink all the way to the bottom as I wanted the area under the sentiment to be clear but you can still see the waves which I like. The embossed waves resist the ink and this is always a fun technique. Once I finished the blending, I removed the stencil and then cleaned off any excess ink from the waves using a soft towel. The wave panel was adhered flat onto a base card and Pisces Girl was popped up with foam tape. I then took a sentiment from Merpeople Of The Sea and stamped it onto black cardstock using Versamark Ink. I applied white detail embossing powder and heat set before trimming it out to fit the width of my panel. This was also added with foam tape. Even though there is quite a lot going on on this card, I do think that it still has a CAS feel to it and I loved how it came together. Thanks for stopping by and I hope that you have a good day. Happy crafting! Copics used: Skin (E70, E53, E51, E50, R20), Lips (R14, R22, R21), Hair (YR23, Y21, Y23, Y32, E50) Fish (BG32, BG11, B01, B00)
Stenciled Joyeux Noelle with Michelle Lupton - Picket Fence Studios

News

Stenciled Joyeux Noelle with Michelle Lupton

by Michelle Lupton on Dec 19 2021
Welcome to another day of our Christmas series at Picket Fence Studios! I've paired up the Joyeux Noel set with the Slim Line Lots of Blossoms stencil and some of the new Gradient Flatback Pearls     Thanks for visiting :)
Holly Jolly Christmas with Julia - Picket Fence Studios

News

Holly Jolly Christmas with Julia

by Julia Piksaykina on Dec 13 2021
2
Hello! Julia here today for the 25 Days Of Christmas Inspiration! I Hope you are all getting into Christmas spirit! Today I am sharing a mini Slimline card, which is very easy to make.  
Happy New Year Mini Slimline Card with Julia - Picket Fence Studios

News

Happy New Year Mini Slimline Card with Julia

by Julia Piksaykina on Dec 06 2021
Hello! Julia here today for the 25 Days Of Christmas Inspiration!
Clean And Simple, And FAST, Holiday Cards with Erica - Picket Fence Studios

News

Clean And Simple, And FAST, Holiday Cards with Erica

by Erica Andersson-Burke on Dec 04 2021
HI guys! It's Erica with you today for your daily dose of 25 Days Of Christmas Inspiration!  If, like me, you are not that great at getting your Christmas cards done early, you might be looking at a classic design that's easy to mass-produce. The cards I'm sharing today are perfect for just this!  I have used the gorgeous Christmas Poinsettia Star stamp and heat embossed it with gold on white card stock. This was then trimmed down a little bit and adhered to a white card base.  The sentiment is also heat embossed, in gold of course, and this is from the For The Holidays stamp set.  Easy Peasy, and mass-produce-able in a jiffy!  Lots of love and happy crafting from Erica 
The Reason for the Season with Julia - Picket Fence Studios

News

The Reason for the Season with Julia

by Julia Piksaykina on Nov 01 2021
1
Hello everyone! Julia here today to share this Christmas card with you created with new products from Picket Fence studios.
With Sympathy - The Cards We Never Want To Make - Picket Fence Studios

News

With Sympathy - The Cards We Never Want To Make

by Lisa Tilson on Oct 20 2021
Hello there, Lisa here today to share a sympathy card with you. These are the cards that we never want to make. I actually find it easier to have a few ready on hand to send out, then at least I am not struggling to do it when the need arises. For sympathy cards, I often keep my colours muted, or at last keep the card really simple. I never feel it's the time for a lot of clutter or "noise" on a card. I started by taking a panel of 80lb white cardstock and securing the Slim Line Changes Stencil to it (from behind) with low tack tape. Then, using Life Changing Blending Brushes, I blended Cracked Pistachio, Tumbled Glass, Twisted Citron and Salvaged Patina Distress Oxides randomly through the stencil. I removed the stencil and cleaned it off. Next I took the Slim Line Oversized With Sympathy Word Die and die cut it from Lawn Fawn Mermaid cardstock. The shadow was die cut from vellum. I adhered the die cut sentiment to the vellum using tiny dabs of wet adhesive so that they wouldn't be visible and then I set it aside to dry. I put an acrylic block on it to make sure it was really stuck down tightly. You could even add extra layers of the word die if you want, to give the card a little bit more dimension. Next, for a bit of extra interest, I took the Leaves For Flowers stamp set and stamped a selection of the leaves onto vellum using Versamark Ink. I then applied white detail embossing powder before heat setting. They were then cut out with the coordinating dies. I trimmed the stencilled panel down slightly and adhered it to an A2 top folding horizontal base card using wet adhesive.  I then added tiny bits of adhesive onto the back of the vellum and adhered that down over the centre. I put some glue onto the little leaves and placed those around the sentiment. It is definitely possible to use this slim line word die on an A2 card. I just trimmed off the excess from the sides and I like how it was the focal point. I hope that this gives you some inspiration for a clean and simple sympathy card. Until next time, happy crafting!  
Happy October My Friend with Julia - Picket Fence Studios

News

Happy October My Friend with Julia

by Julia Piksaykina on Oct 11 2021
1
Hello crafty friends! Today I am sharing the Clean and Simple Halloween card featuring Hocus Pocus Dear stamp set and Spider Web Cover Plate Die.